Design of a wideband variable gain amplifier
نویسندگان
چکیده
منابع مشابه
A New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملA 28-36 GHz Optimized CMOS Distributed Doherty Power Amplifier with A New Wideband Power Divider Structure
Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...
متن کاملA High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process
This paper presents a two-stage low-noise ultra-wideband amplifier to obtain high and smooth gain in 180nm CMOS Technology. The proposed structure has two common source stages with inductive feedback. First stage is designed about 3GHz frequency and second stage is designed about 8GHz. In simulation, symmetric inductors of TSMC 0.18um CMOS technology in ADS software is used.Simulations results ...
متن کاملA 0.1-1 GHz CMOS Variable Gain Amplifier Using Wideband Negative Capacitance
This Paper presents the design of a wideband variable gain amplifier (VGA) using 0.18 μm standard CMOS technology. The proposed VGA realizes wideband flat gain using wideband flat negative capacitance. It achieves a 3 dB gain bandwidth of 1 GHz with a maximum gain of 23 dB. Also, it shows P1 dB of −33 to −6 dBm over the gain range of −28 to 23 dB. The overall current consumption is 5.5 mA under...
متن کاملA Variable Gain Amplifier for Wideband DCRs using 0.13μm CMOS Technology
A wideband variable gain amplifier (VGA) design is introduced with two different schemes. It is based on a fully differential amplifier with resistive loads, and a Negative Miller Capacitance technique is used to increase the bandwidth of the amplifier. The amplifier consists of three stages, and the gain is varied through the second and third stages, where they are degenerated by a voltage con...
متن کامل