Computer Modeling of Hydrodynamic and Heat-Mass Transfer Processes in the Vortex Type Granulation Devices
نویسندگان
چکیده
The article is devoted to the development of software for calculating the hydrodynamic conditions and kinetic characteristics of granulation process in vortex devices. In the basis software Vortex Granulator© and Classification in vortex flow original mathematical model for calculating the flow rate of gas and granules classification and separation processes of granules in a vortex granulator, kinetics of granules heating and removing moisture from the granules was put. The theoretical model, structure of software and algorithm of their work is shown. In the article an algorithm for calculation of the granulation process in the vortex granulator using the developed software is shown. Software designed in JavaFx platform. Vortex Granulator and Classification in vortex flow allow to conduct an optimization calculation of vortex granulator according the criteria of minimum required residence time of granules in device workspace.
منابع مشابه
Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition
Water cooling by ambient takes place with two mechanisms of heat and mass transfer. Using packings at wet cooling towers has disadvantages such as obstruction, reduction of life expectancy and production of algae and fungi. In shower cooling towers types of towers packings are completely removed and water intake is in direct contact and heat transfer takes place in two ways of latent and sensib...
متن کاملHeat transfer enhancement in a spiral plate heat exchanger model using continuous rods
This study presents an innovative and simple way to increase the rate of heat transfer in a spiral plate heat exchanger model. Several circular cross-section rods, as continuous vortex generators, have been inserted within the spiral plate heat exchanger in the cross-stream plane. The vortex generators are located at various azimuth angles of α=30◦, 60◦, 90◦, and 120◦ with non-dimensional diame...
متن کاملInvestigation of shell and tube heat exchangers by using a design of experiment
Heat exchangers are one of the most important devices of mechanical systems in modernsociety. Most industrial processes involve the transfer of heat and more often they requirethe heat transfer process to be controlled. A heat exchanger is the heat exchanged betweentwo media, one being cold and the other being hot. There are different types of heatexchanger, but the type which is widely used in...
متن کاملNumerical study of fluid flow and heat transfer in a gas-tank water heater
Influence of a vent hood at the exit of exhaust flue gas and flue baffles in the firetube on the temperature and flow fields of a gas tank water heater, as well as thestructure and amount of heat transferred to the water tank has been studiednumerically using two-dimensional steady state finite element simulation.Observations show that without a vent hood, there is a downward gas flow in theflu...
متن کاملSimulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material
Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer durin...
متن کامل