Step-up Dc-dc-converter with Coupled Inductors for Low Input Voltages
نویسندگان
چکیده
Step-up dc-dc converters have to cope with extremely low input voltages when used in combination with energy harvesting sources like thermogenerators, inductive generators or solar cells. The presented dc-dc converter is characterized by a high efficiency, up to 70 % in the input voltage range between 200 mV and 500 mV, and a minimum start-up voltage of 70 mV. It can deliver an output power of about 5 mW with an input voltage of 300 mV and an input current of 3.5 mA for an output voltage of 2 V.
منابع مشابه
An Interleaved Configuration of Modified KY Converter with High Conversion Ratio for Renewable Energy Applications; Design, Analysis and Implementation
In this paper, a new high efficiency, high step-up, non-isolated, interleaved DC-DC converter for renewable energy applications is presented. In the suggested topology, two modified step-up KY converters are interleaved to obtain a high conversion ratio without the use of coupled inductors. In comparison with the conventional interleaved DC-DC converters such as boost, buck-boost, SEPIC, ZETA a...
متن کاملA Coupled Inductor Based High Voltage Gain DC-DC Converter Using Interleaved Voltage Multiplier Cells
In this work, a non-isolated high step up DC-DC converter using coupled inductor and voltage multiplier cell is proposed. The proposed converter conversion ratio is efficiently extended by using a coupled inductor. An interleaved configuration of two diode-capacitor cells is applied to step up the voltage conversion ratio and decrease the voltage stress across the switches. Also, in the suggest...
متن کاملارائه یک مبدل DC-DC دو طرفه چند درگاهه جدید با قابلیت کلیدزنی نرم و بررسی عملکرد مبدل برای استخراج حداکثر توان از آرایهی فتوولتائیک
In this paper, a non-isolated multi-port zero-voltage-switching bidirectional dc-dc converter is proposed. Free ripple condition of input currents is obtained by using coupled inductors in any stages. Proposed converter is analyzed as a five port converter. It is possible to increase number of input sources up to as a kind of port converter. The proposed converter can be used in both boost and ...
متن کاملDesign of Single Input Multiple Output DC-DC Converter
This paper proposes a design of single input multiple output (SIMO) dc–dc converter. The proposed converter can generate the voltage of a low voltage input to controllable levels of boosted output voltage and it can also produce the inverted output voltage. This dc-dc converter utilizes the properties of voltage clamping and soft switching based on a coupled inductor. In this paper, the design ...
متن کاملAn Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor
Multiple output DC-DC converters are widely used in many applications such as aerospace, industrial and medical equipments. The purpose of this paper is to present an intelligent control system for the multiple output DC-DC converters. In order to perform this purpose, a double ended forward DC-DC converter with three output voltages (+5 V/ 50W, +15 V/ 45W and -15 V/ 15W) is considered and anal...
متن کامل