Pspice Simulation of Power Electronics Circuit And
نویسنده
چکیده
This paper shows how power electronics circuits, electric motors and drives, can be simulated with modern simulation programs. The focus will be on PSpice, which is one of the most widely used general-purpose simulation programs. A simulation example is presented, and the results are compared with those obtained with Power System Simulation Tool based on Simulink.
منابع مشابه
Modeling of Ungrounded Shipboard Power System in Pspice
Navy shipboard power systems have different characteristics when compared to utility power systems. To conduct system studies on shipboard power systems, an effective simulation tool is required to model shipboard electric power systems. PSpice is a very powerful tool for analog/digital circuit simulation, but it is rarely used for power systems. This paper presents modeling shipboard power sys...
متن کاملA Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کاملA New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation
The trans-admittance-mode (TAM) might act as a transforming bridge for voltage-mode to current-mode conversion. In this study a new low voltage operated electronically tunable TAM biquad filter structure realizing all the seven standard filtering functions namely; low-pass (LP), band-pass (BP), high-pass (HP), regular-notch (RN), low-pass-notch (LPN), high-pass-notch (HPN) and all-pass (AP) fro...
متن کاملA Current-Mode Single-Resistance-Controlled Oscillator Employing VDCC and All Grounded Passive Elements
Realization of a novel single-resistance-controlled oscillator, employing an active element and all grounded passive elements, is the purpose of this manuscript. With requirements for completing the design being only a single Voltage Differencing Current Conveyor and four grounded passive components, it is also a preferable choice for integrated circuit implementation. The designed circuit has ...
متن کاملPSPICE Implementation of an 8-bit Low Power Energy Recovery Full Adder
Energy recovery technique has attracted interest of low power VLSI designers in recent years. This low power design technique has been proposed and discussed by many researchers. In this paper, we implemented energy recovery technique in the PSPICE using an 8-bit full adder circuit as an example. Full adder circuit has been widely used in arithmetic operations for addition, multipliers and Arit...
متن کامل