Omnidirectional reflector using nanoporous SiO2 as a low-refractive-index material.
نویسندگان
چکیده
Triple-layer omnidirectional reflectors (ODRs) consisting of a semiconductor, a quarter-wavelength transparent dielectric layer, and a metal have high reflectivities for all angles of incidence. Internal ODRs (ambient material's refractive index n >> 1.0) are demonstrated that incorporate nanoporous SiO2, a low-refractive-index material (n = 1.23), as well as dense SiO2 (n = 1.46). GaP and Ag serve as the semiconductor and the metal layer, respectively. Reflectivity measurements, including angular dependence, are presented. Calculated angle-integrated TE and TM reflectivities for ODRs employing nanoporous SiO2 are R(int)/TE = 99.9% and R(int)/TM = 98.9%, respectively, indicating the high potential of the ODRs for low-loss waveguide structures.
منابع مشابه
Dielectric omnidirectional visible reflector.
We demonstrate the fabrication of an all-dielectric omnidirectional mirror for visible frequencies. The dielectric reflector consists of a stack of 19 alternating layers of tin (IV) sulfide and silica. Using a combination of thermal evaporation (for tin sulfide) and thick electron-beam evaporation (for silica), we have achieved a refractive-index contrast of 2.6/1.46 , one of the highest refrac...
متن کاملVery low-refractive-index optical thin films consisting of an array of SiO2 nanorods.
The refractive-index contrast in dielectric multilayer structures, optical resonators, and photonic crystals is an important figure of merit that creates a strong demand for high-quality thin films with a low refractive index. A SiO2 nanorod layer with low refractive index of n = 1.08, to our knowledge the lowest ever reported in thin-film materials, is grown by oblique-angle electron-beam depo...
متن کاملLight-Output Enhancement of GaN-Based Light-Emitting Diodes with Three-Dimensional Backside Reflectors Patterned by Microscale Cone Array
Three-dimensional (3D) backside reflector, compared with flat reflectors, can improve the probability of finding the escape cone for reflecting lights and thus enhance the light-extraction efficiency (LEE) for GaN-based light-emitting diode (LED) chips. A triangle-lattice of microscale SiO2 cone array followed by a 16-pair Ti3O5/SiO2 distributed Bragg reflector (16-DBR) was proposed to be attac...
متن کاملBroadband omnidirectional antireflection coatings optimized by genetic algorithm.
An optimized graded-refractive-index (GRIN) antireflection (AR) coating with broadband and omnidirectional characteristics--as desired for solar cell applications--designed by a genetic algorithm is presented. The optimized three-layer GRIN AR coating consists of a dense TiO2 and two nanoporous SiO2 layers fabricated using oblique-angle deposition. The normal incidence reflectance of the three-...
متن کاملLight-Extraction Enhancement of GaInN Light-Emitting Diodes by Graded-Refractive-Index Indium Tin Oxide Anti-Reflection Contact
In photonics and optics, the refractive index of a material, first introduced by Isaac Newton as the optical density, is the most fundamental material constant. Since the refractive index determines refraction and reflection occurring at the boundary between two media, it is a critical parameter for the design of optical components, such as distributed Bragg reflectors (DBRs), omnidirectional r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics letters
دوره 30 12 شماره
صفحات -
تاریخ انتشار 2005