Ion release from casts of commercially pure titanium in mixed solutions of organic acids contained in human saliva.

نویسندگان

  • Teruhisa Hirayama
  • Marie Koike
  • Tadafumi Kurogi
  • Akiko Shibata
  • Shigeru Nakamura
  • Motohiro Terano
  • Yoshihisa Yamabe
  • Hiroshi Murata
  • Hiroyuki Fujii
چکیده

PURPOSE The purpose of this study was to investigate the ion release from titanium casts in solutions of mixed organic acids and to reconsider the possibility of allergic reactions to titanium. METHODS Cast specimens were made from commercially pure titanium. For the immersion solutions, we prepared two types of organic acid solutions, one mixed with organic acids contained in whole stimulated saliva at two different dilutions, and the other, a lactic acid solution. Following immersion, the amounts of dissolved titanium ions, weight loss of the casts, and micrographs of the specimen surfaces were examined. RESULTS There were significantly larger amounts of dissolved titanium ions in the mixed organic acid solutions than in the lactic acid solution. There was also a significant difference in the weight loss values between the immersion solutions (p < 0.0001), but the significance level was different from that of the difference in the quantity of ion elution. CONCLUSION The results suggested that a much larger quantity of ions is released from titanium casts attached in the oral cavity than has been reported previously, and that it is necessary to consider the possibility of allergic reactions to titanium casts.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Assessment of the rate of orthodontic appliances ion release in different mouthwashes: An overview

Background and Aims: All metal components of orthodontic appliances are somewhat corroded in the oral environment due to some changes in chemical, mechanical, thermal, microbiological and enzymatic factors which facilitates ion release. Ionic release can result in a discoloration of the surrounding soft tissue or allergic reactions in sensitive patients or even local pain in the area. In genera...

متن کامل

INVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM

Abstract: In chloride salt solutions, titanium alloys exhibit reasonably high pitting potentials as high as +10 V (vs. Ag/AgCl) at room temperatures. On the other hand, anodic pitting potentials are significantly lower in bromide solutions. In this study, pitting corrosion of commercially pure titanium in aqueous NaBr solution of 0.1 M concentration at room temperature was studied and the e...

متن کامل

Galvanic Corrosion and Ion Release from Different Orthodontic Brackets and Wires in Acidic Artificial Saliva: Part I

&nbsp; Objective: Corrosion resistance is among the most important properties of metal alloys used in the oral cavity. Consumption of acidic foods reduces the salivary pH and intensifies the corrosion of brackets and orthodontic wires. This study aimed to compare electro galvanic corrosion of different orthodontic brackets and wires and determine the amount of ions released into acidic artifici...

متن کامل

Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium

In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...

متن کامل

Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium

In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nihon Hotetsu Shika Gakkai zasshi

دوره 52 4  شماره 

صفحات  -

تاریخ انتشار 2008