The Technology of Enhanced Color Saturation

نویسنده

  • David L. Long
چکیده

SMPTE Journal, April 2001 K Ektachrome 100D color reversal film/5285 was introduced to the motion picture market in December 1999. Its release marked the culmination of a number of years of work on the part of researchers in both Kodak’s Color Reversal and Entertainment Imaging R&D groups. The design concept was to create a highly saturated color reversal film at an EI100 speed without compromising flesh and neutral reproductions. A total of three films incorporating the high color technology have been introduced by Kodak: Professional Ektachrome film E100VS for the professional still photography market, Elite chrome extra color 100 film for the consumer still photography market, and Ektachrome 100D color reversal film for the motion picture market. A summary of general performance attributes of the three films can be found in Table 1. Table 2 shows the characteristic curve comparisons between camera positive 100D film and camera negative Eastman EXR 50D film/5245 printed to a positive on Kodak Vision color print film/2383 (the only fair sensitometric comparison of a negative film and a positive film requires the negative be printed). Photographic Color Reproduction: The Basics

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Decolorization of a Reactive Dye by UV-Enhanced Ozonation

In the present study the treatment efficiency of O3 and UV+O3 processes were compared for the oxidation of simulated dyebath effluent containing a mixture of a reactive dye (C.I. Reactive Blue 19) and various dye auxiliary chemicals. The color, COD and TOC removal rates were assessed for different processes. The effect of initial dye concentration and presence of sodium hydroxide and sodium car...

متن کامل

Synthesis of Wurtzite Nano-crystalline ZnO-CoO Pigment by High Energy Milling

Zn0.9Co0.1O ceramic pigments were synthesized using simple high energy milling method. Zinc and cobalt oxides were used as starting materials. Products were investigated using simultaneous thermal analysis and fourier transformation infrared. Pigments were characterized using X-ray diffraction, diffuse reflectance and Scanning Electron Microscopy. The results showed the effect of calcination te...

متن کامل

Acetylacetonate Complexes as New Corrosion Inhibitors in Phosphoric Acid Media: Inhibition and Synergism Study

The corrosion inhibition performance of acetylacetonate complexes of zinc(II), manganese(II), cobalt(II) and copper(II) on the mild steel substrate in 1M H3PO4 was studied using DC polarization. It was seen that the mentioned complexes decreased corrosion rate of mild steel in phosphoric acid media due to the adsorption on metal surface. The potential of mild steel shifted toward more active po...

متن کامل

Chemical Synthesis of Nano-Crystalline Nickel-Zinc Ferrite as a Magnetic Pigment

The nano-crystalline nickel-zinc ferrite was prepared via chemical synthesis. Zinc nitrate, nickel nitrate, iron nitrate hydrate, citric acid and ethylene glycol were used as precursor materials. Crystallization behavior of the precursor was studied by X-ray diffraction (XRD). Nanoparticle phases can change amorphous to spinel ferrite depending on the calcination temperature and crystallite siz...

متن کامل

Mild steel surface pretreatment using phosphoric acid-inhibitor solution

In this study, a new mild steel surface pretreatment solution is introduced based on phosphoric acid containing a benzimidazole derivative as inhibitor. In this way, three different benzimidazole derivatives namely benzimidazole BI, 2-methyl benzimidazole 2MBI and 2-aminobenzimidazole 2ABI were studied in the 1M H3PO4 using DC and AC electrochemical techniques. Results revealed the better corro...

متن کامل

Single Cell-gap Transflective color TFT-LCD by using Image-Enhanced Reflector

By building an image-enhanced reflector above the transmissive region of liquid crystal cell, the transmissive light can follow the similar path with ambient light that both reflective and transmissive portions can achieve high optical efficiency. same response time and color saturation. Furthermore, onk single retardation film is required in this transflective color TFT-LCD, and ambient light ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012