The effect of adding hydroxyapatite on the flexural strength of glass ionomer cement.
نویسندگان
چکیده
This present study investigated the effects of the addition of hydroxyapatite (HA) on the flexural strength and microstructure of conventional GIC, and its effect on the cement's initial flexural strength at different storage conditions. Specimens were fabricated by mixing HA in whisker or granule form into commercially prepared GIC, and these were subjected to a three-point bending test and SEM observations. Some specimens were stored in different conditions from dry to wet for 15 minutes to an hour prior to testing. When compared to the control, specimens with 16-25% HA whiskers added at P/L 1.75 showed a significant increase in the flexural strength (p < 0.05), and as well with 19% HA whiskers at P/L 1.75 (p < 0.001) and 2.33 (p < 0.05). A significant increase was also noted for those with 8-25% HA granules added at P/L's 1.75 (p < 0.05), 2.5 (p < 0.05) and 3.60 (p < 0.01). The addition of HA hastens the development of early (15 min, 1 hour) flexural strength of GIC in moist or wet conditions. These results indicate that the addition of HA, regardless of form, improve the flexural and microstructural properties of GIC.
منابع مشابه
Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber
The aim of this study was to synthesis of glass ionomer-silk fiber composite and to evaluate the effect of adding natural degummed silk fiber on the mechanical properties of glass ionomer cement (GIC). For this purpose, natural degummed silk fibers with 1 mm in length and 13-16 µm in diameter were added to the ceramic component of a commercial glass ionomer cement in 1, 3 and 5 wt. %. Compressi...
متن کاملEffects of N-Vinylcaprolactam Containing Polyacids and Zirconia on Mechanical Properties of Commercial Glass Ionomer Cements
This study aimed to investigate the impact of N-vinylcaprolactam (NVC) and Nano-sized yttria-stabilized zirconia (YSZ), separately and simultaneously, on the mechanical properties of the commercial glass ionomer cements (GICs). Methods: The NVC is able to ameliorate the mechanical and surface properties of glass ionomers; however, its effect hasn’t been investigated in conjunc...
متن کاملThe effect of heat on the mechanical properties of glass ionomer cements.
AIM The objective of this study was to assess the effect of heat application on the mechanical properties of glass ionomer cements. MATERIALS AND METHODS STUDY DESIGN experimental design. The effect of heat on glass ionomer cements during their setting was evaluated by measuring compressive strength, flexural strength and microhardness. Moroever, temperature changes from one surface of the...
متن کاملبررسی مقایسهای تأثیر افزودن نانوذرات دیوپسید و سیلیکا سولفوریک اسید بر خواص مکانیکی سیمانهای گلاس آینومر
The aim of the present study is to study the effects of adding diopside (CaMgSi2O6) as well as silica sulfuric acid nanoparticles to ceramic part of glass ionomer cement (GIC) in order to improve its mechanical properties. To do this, firstly, diopside (DIO) nanoparticles with chemical formula of CaMgSi2O6 were synthesized using sol-gel process and then, the structural and morphological p...
متن کاملIncorporation of Hydroxyapatite-Silica Nano-Powder for Enhancement of Glass Ionomer Cement (GIC)
Glass Ionomer Cement (GIC) is one of the most popular materials among the available dental restorative materials. They have desirable properties like direct adhesion to the tooth structure, thermal compatibility [1] and good biocompatibility [2,3]. Despite these advantages, brittleness, low tensile and flexural strengths have limited their use only to certain low stress-bearing sites. As such, ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dental materials journal
دوره 22 2 شماره
صفحات -
تاریخ انتشار 2003