Uniform and graded chemical milling of aluminum foams
نویسنده
چکیده
Uniform and graded chemical milling of aluminum foams Y. Matsumoto a,∗, A.H. Brothers b, S.R. Stock c, D.C. Dunand b a Department of Mechanical Engineering, Oita National College of Technology, 1666 Maki, Oita 870-0152, Japan b Department of Materials Science and Engineering, Northwestern University, 2220 Campus Drive, Evanston, IL 60208-3108, USA c Department of Molecular Pharmacology and Biological Chemistry, Northwestern University, 303 East Chicago Avenue, Chicago, IL 60611-3008, USA
منابع مشابه
Mechanical properties of a density-graded replicated aluminum foam
The compressive mechanical properties of uniform and density-graded Al-6061 foams, produced by replication of polymer foams, are measured. hile the uniform foam shows compressive behavior characteristic of conventional (uniform) metallic foams with a near constant plateau stress, he density-graded foam exhibits a smoothly rising plateau stress. This behavior is modeled using a simple series com...
متن کاملDensity-Graded Cellular Aluminum
Conventional metallic foam processing seeks to maximize uniformity in pore size, relative density, and other aspects of foam structure in order to minimize property variation associated with the statistical nature of foams, and thereby increase their reliability in service. However, property uniformity is in many cases an inefficient approach to meeting overall design criteria, as demonstrated ...
متن کاملDeformation and Plateau Region of Functionally Graded Aluminum Foam by Amount Combinations of Added Blowing Agent
Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH₂) powder were fabricated by a friction stir weld...
متن کاملEffect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response
AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...
متن کاملSimulation of Foaming and Deformation for Composite Aluminum Foams
In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...
متن کامل