Design procedure for optimizing CMOS low noise operational amplifiers
نویسندگان
چکیده
This paper presents and experimentally verifies an optimized design procedure for a CMOS low noise operational amplifier. The design procedure focuses on the noise performance, which is the key requirement for low noise operational amplifiers. Based on the noise level and other specifications such as bandwidth, signal swing, slew rate, and power consumption, the device sizes and the biasing conditions are derived. In order to verify the proposed design procedure, a three-stage operational amplifier has been designed. The device parameters obtained from the proposed design procedure closely agree with the simulated results obtained by using HSPICE.
منابع مشابه
A Multi-objective Optimization Methodology Applied to the Low-power Cmos Operational Amplifiers
This paper presents a novel design methodology for optimizing the performance of CMOS op-amp topologies by using Multi-Objective optimization Methodology. This methodology is used to find the optimal transistor dimensions in order to acquire operational amplifier performances for analog and mixed signal circuit applications. The goal is to automatically determine the device size in order to mee...
متن کاملA 97dB, 21μW uncompensated CMOS Operational Amplifier Design for Biomedical Applications
In this paper the challenge of enhancing the gain and reducing the power requirement of amplifiers, preferably used in biomedical applications is addressed by demonstrating that composite cascode stages, operating in subthreshold/weak inversion regions provide a method of designing a ultra high gain (97dB) and low-power (21μW) op amp with 1.5V power supply. The op amp is designed without compen...
متن کاملDesigning CMOS folded-cascade operational amplifier And Implementation with CMOS Technology in IC
In this paper a new high gain bandwidth (GBW) and low power folded cascade OPAMP is presented. It has been implemented and layouted by CADENCE software in 0.18μm. Its DC gain is 82db and its bandwidth is 200MHz. Power consumption is one of the main design challenges in very-lowvoltage high-speed analog integrated circuits. In this paper, different techniques to reduce the power consumption in l...
متن کاملDynamic Offset Cancellation Techniques for Operational Amplifiers
At low frequencies, offset, 1/f noise and drift are the dominant error sources of operational amplifiers. This is especially true in CMOS technology. This chapter reviews precision techniques that can be used to achieve low 1/f noise and low offset in operational amplifiers. There are three types of CMOS offset cancellation techniques: trimming, chopping, and auto-zeroing. Trimming is usually p...
متن کاملDesign of Low Power and High Gain Boosted Ota for High Frequency Radio Modulations and Telecommunication Systems
This paper presents the design of high gain and low power fully differential Operational Transconductance Amplifier(OTA). Both the main conventional OTA and the boosting amplifiers are fully differential folded cascode.To increase the open-loop gain of the main OTA two auxiliary operational amplifiers(op-amps) are used . These auxiliary op-amps are fully differential folded cascode op-amps with...
متن کامل