Brittle fracture characteristics of a 50 mm boron containing HSLA steel
نویسندگان
چکیده
منابع مشابه
Probabilistic Modeling of Brittle Fracture Including 3-D Effects on Constraint Loss and Ductile Tearing
This study presents a probabilistic, 3-D framework to describe brittle fracture in structural components which incorporates weakest link statistics and a micromechanics model reflecting local damage of material. The Weibull stress (a,) emerges as a fracture parameter to define conditions leading to local material failure. This parameter is correlated with the macroscopic loading and used to des...
متن کاملDynamic and Quasi-Static Tensile Properties of Structural S400 Steel
The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...
متن کاملProperties of Boron Steel after Different Heat Treatments
In this article boron steel is analyzed on the example of steel grade B27. In view of the fact that steel is supplied in a state after hot rolling, and the choice of a suitable heat treatment is left to the buyer steel were examined after conventional heat treatments. Steel was studied in state as delivered, after normalization, after quenching and after quenching and tempering at different tem...
متن کاملShear and tensile plastic behavior of austenitic steel TRIP-120 compared with martensitic steel HSLA-100
Themechanical performanceofTRIP-120, a novel transformation induced plasticity steel alloy, is evaluated for different loading cases and strain rates. The performance is compared with HSLA-100, a lowalloy steel developed by the United States Navy and currently used in naval hulls. The response of these materials under uniaxial tension and shear was investigated to the point of fracture at isoth...
متن کاملInfluence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel
In this research the role of alloying elements on the microstructure and mechanical properties of an as cast and hot rolled high strength low alloy (HSLA) steel was studied. Different compositions with different amount of copper in the presence of nickel, hot rolled and quenched in oil. Tensile test, hardness test, scanning electron microscope (SEM) and optical microscope (OM) were used to eval...
متن کامل