Method for the Characterization of Extreme-Ultraviolet Photoresist Outgassing

نویسنده

  • Charles Tarrio
چکیده

Outgassing from photoresists illuminated by extreme ultraviolet radiation can lead to degradation of the very expensive multilayer-coated optics in an extreme ultraviolet stepper. Reliable quantification of the various organic molecules outgassed by photoresists has been a challenging goal. We have designed a compact system for this measurement. In the first step, the total number of molecules emitted by the photoresist is measured using a pressure-rise method in a closed vacuum chamber, with the pressure measured by mechanical means using a capacitance displacement gauge. To provide identification and relative abundances, the outgassed molecules are then collected in an evacuated trap cooled by liquid nitrogen for subsequent analysis by gas chromatography with mass spectrometry. We will discuss the design and performance of the system.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nanoscale patterning in high resolution HSQ photoresist by interferometric lithography with tabletop extreme ultraviolet lasers

Arrays of nanodots and nanoholes were patterned with a highly coherent tabletop 46.9 nm laser on high resolution hydrogen silsesquioxane photoresist using multiple exposure interferometric lithography. The authors observed for =46.9 nm radiation a penetration depth in excess of 150 nm. This laser-based extreme ultraviolet interferometric setup allows printing of 0.5 0.5 mm2 areas with different...

متن کامل

Fabrication of High-eciency Multilayer-coated Binary Blazed Gratings in the Euv Regime

Improving the eciency of soft X-ray and extreme ultraviolet (EUV) gratings by way of multilayer re¯ection coatings has been under investigation for many years. Here we present the fabrication and characterization of binary blazed gratings designed to operate in the 14 nm wavelength region. These binary gratings are stepped approximations to the ideal sawtooth blazed-grating pro®le and are fabr...

متن کامل

Directed integration of ZnO nanobridge sensors using photolithographically patterned carbonized photoresist.

A method for achieving large area integration of nanowires into electrically accessible device structures remains a major challenge. We have achieved directed growth and integration of ZnO nanobridge devices using photolithographically patterned carbonized photoresist and vapor transport. This carbonized photoresist method avoids the use of metal catalysts, seed layers, and pick and place proce...

متن کامل

Photocatalyst Ag@N/TiO2 Nanoparticles: Fabrication, Characterization, and Investigation of the Effect of Coating on Methyl Orange Dye Degradation

In this research, N-doped TiO2 (N/TiO2) nanoparticles have been synthesized by a sol-gel method. N/TiO2 nanoparticle has been coated with Ag metal by photochemical method. Triethylamine, N(CH3CH2)3, have been used as precursors of Nitrogen, titanium tetraiso-propoxide (TTIP), Ti[OCH(CH3)2]4, used as precursors of titanium and Ag(NO3)2 used as precursors of Silver in synthesis of these nanoparti...

متن کامل

Defect tolerant extreme ultraviolet lithography technique

Related Articles Comparison of the effects of downstream H2and O2-based plasmas on the removal of photoresist, silicon, and silicon nitride J. Vac. Sci. Technol. B 31, 021206 (2013) Impacts of point spread function accuracy on patterning prediction and proximity effect correction in low-voltage electron-beam–direct-write lithography J. Vac. Sci. Technol. B 31, 021605 (2013) Origin of defects on...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 114  شماره 

صفحات  -

تاریخ انتشار 2009