A Universal 3.3V 1 GHz BiCMOS Transceiver (Driver/Receiver) - Bipolar/BiCMOS Circuits and Technology Meeting, 1995., Proceedings of the 1995
نویسندگان
چکیده
A universal BiCMOS low-voltage-swing transceiver (driverlreceiver) with low on-chip power consumption is reported. Operating at 3.3V, it can drivekeceive low-voltageswing signals with termination voltages ranging from SV down to 2V without using any external reference voltages.
منابع مشابه
Low-Power BiCMOS Circuits for High-Speed Interchip Communication [Brief Papers] - Solid-State Circuits, IEEE Journal of
A universal BiCMOS low-voltage-swing transceiver (driver/receiver) with low on-chip power consumption is reported. Using a 3.3 V supply, the novel transceiver can drive/receive signals from several low-voltage-swing transceivers with termination voltages ranging from 5 V down to 2 V and frequencies well above 1 GHz. Measured results of test circuits fabricated in 0.8m BiCMOS technology are also...
متن کاملDesign and Verification of On-Chip Impedance-Matching Circuit Using Transmission-Line Theory for 2.4 GHz-Band Wireless Receiver Front-End
Recently, spiral inductors have widely been used instead of resistors in the design of matching circuits to enhance the thermal noise performance of a wireless transceiver. However, such elements usually have low quality factor (Q) and may encounter the self-resonance in microwave-frequency band which permits its use in higher frequencies, and on the other hand, they occupy the large on-chip sp...
متن کاملA Single-Chip Quad-Band GSM/GPRS Transceiver in 0.18μm Standard CMOS
CMOS RF has evolved from a novelty to a necessity with the mergence of all analog and digital functionality into a single chip for standards such as Bluetooth and WLAN/802.11. The stringent performance requirements associated with cellular standards such as GSM, however, has either limited the level of RF transceiver integration, or compelled the use of alternative technologies such as BiCMOS o...
متن کاملQuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit - AN635
A broadband phase-lock loop (PLL) building block integrated circuit (IC) that can accommodate signal frequencies from 0.5GHz to 9GHz is presented. The design integrates a prescaler with selectable divide ratio, a phase detector, a voltage-controlled oscillator for production testing, and associated circuitry. The chip is designed on Maxim's GST-2 bipolar linear array technology and is packaged ...
متن کاملGHZ Si BiCMOS ACTIVE INDUCTORS
The limitations on the implementation of BiCMOS active inductors at 2GHz are described. The circuit is based on a two BJT feedback configuration. Two types of biasing circuits were used: active bias and resistive bias. With 0.8μm BiCMOS standard technology is possible to obtain up to a few nanohenry inductance with a Q close to 3 at 2GHz. Two MMIC were studied.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004