Optimization of Drilling Parameters on Delamination Based on Taguchi Method in Drilling of Natural Fiber Reinforced (Agave) Composite
نویسنده
چکیده
Agave is the one of the abundantly available plant in India. The wide application of agave reinforced composite plate necessitate the joining of two plates together. For making such joint drilling of those plates is required. Drilling of natural fiber composites is different from the other metals because of its mechanical properties. The major problem faced in drilling of theses natural fiber composites was delamination of the fiber. This paper studies the effect of the input parameters such as cutting speed and feed and Drill diameter on the delamination induced during drilling. Taghuchi method is used for minimizing delamination induced due to input parameters .This study revealed that the input parameters such as cutting speed and feed rate both are influential in on the delamination. ANOVA is carried out to find the influencing parameters. Keyword: rilling,Taghuchi,Agave,NFRP,Composite
منابع مشابه
Optimization on Delamination of Cutting Parameter during Drilling on Gfrp Plastics Based on Taguchi Method
Drilling of glass fibre reinforced plastic (GFRP) composite is different from metallic materials due to its mechanical properties. The drilling of this material may generate delamination of drilled holes on workpiece. The purpose of this paper is to investigate the influence of the cutting parameters, such as cutting speed and feed rate, point angle of drill and material thickness on delaminati...
متن کاملDetermination of optimum parameters on delamination in drilling of GFRP composites by Taguchi method
Drilling is one of the important machining processes in hole making operations. Delamination is a vital problem during any drilling operation. It causes structural integrity reduction and poor assembly tolerance as well as potential for long-term performance deterioration. As a result, drilling of any material requires dimensional stability and interface quality. In this study, glass fibre rein...
متن کاملOptimization of Process Parameters in Drilling of GFRP Composites Drilled by an End Mill
Abstract— Due to the superior physical and mechanical properties Glass fiber-reinforced (GFRP) composite materials are very attractive for applications like aerospace and air craft structural components. This results a large number of research papers on machining of these composite laminates. Out of all the machining operations, most commonly used operation is drilling. However, drilling operat...
متن کاملEffect of Machining Parameters on Roystoneafiber Reinforced Composites
The present project work deals with the machining of natural fiber composite to study the delamination effect. The natural fiber composite consists of ROYSTONEA(Royal palm fiber) and material has matrix. And this composite has been fabricated by using hand layup method after extracting the fiber by retting method. Drilling operation has been carried out on the fabricated composite by using CNC ...
متن کاملOptimization of Process Parameters in Drilling of Smc Composites Using Taguchi Method
Original scientific paper This paper has presented and discussed machinability in the drilling of SMC (Sheet Mould Compound) A-Class composite materials using Taguchi's DoE method. The thrust forces, surface roughness and push-out peel-up delamination behaviour in drilling process for glass fibre reinforced SMC composites have been evaluated. The experimental results and the contribution ratio ...
متن کامل