A Two-scale Failure Model for Heterogeneous Materials: Numerical Implementation Based on the Finite Element Method
نویسندگان
چکیده
1CIMEC-UNL-CONICET, Güemes 3450, CP 3000, Santa Fe, SF, Argentina. 2GIMNI-UTN, Lavaise 610, CP 3000, Santa Fe, SF, Argentina. 3CIMNE, Technical Univ. of Catalonia, Campus Nord UPC, Edifici C-1, J.Girona 1-3, 08034 Barcelona, Spain. 4GIDMA-UTN-FRC/CONICET, Maestro M. Lopez esq. Cruz Roja Argentina, CP X5016ZAA, Córdoba, Cba, Argentina. 5LNCC/MCTI Laboratório Nacional de Computação Cientı́fica, Getúlio Vargas 333, Petrópolis, Rı́o de Janeiro, CEP: 25651-075, Brasil. 6INCT-MACC Instituto Nacional de Ciência e Tecnologia em Medicina Assistida por Computação Cientı́fica, Brasil.
منابع مشابه
Comparison of two integration schemes for a micropolar plasticity model
Micropolar plasticity provides the capability to carry out post-failure simulations of geo-structures due to microstructural considerations and embedded length scale in its formulation. An essential part of the numerical implementation of a micropolar plasticity model is the integration of the rate constitutive equations. Efficiency and robustness of the implementation hinge on the type of int...
متن کاملNumerical Simulation of the Hydrodynamics of a Two-Dimensional Gas—Solid Fluidized Bed by New Finite Volume Based Finite Element Method
n this work, computational fluid dynamics of the flow behavior in a cold flow of fluidized bed is studied. An improved finite volume based finite element method has been introduced to solve the two-phase gas/solid flow hydrodynamic equations. This method uses a collocated grid, where all variables are located at the nodal points. The fluid dynamic model for gas/solid two-phase flow is based on ...
متن کاملFinite element simulation of two-point incremental forming of free-form parts
Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...
متن کاملMeso-scale Modeling of Tension Analysis of Pure and Intra-ply Hybrid Woven Composites Using Finite Element Method
One of the key issues associated with using of composites in various applications is their tensile behavior. The tensile behavior of a composite material is strongly influenced by the properties of its constituents and their distribution. This paper focuses on gaining some insights into the tensile process of pure and hybrid woven composite reinforced with brittle and ductile yarns. For this pu...
متن کاملCombined mesh superposition method and homogenization approach for a crack problem in periodic composites
The paper deals with numerical computation of a crack problem posed on microstructural heterogeneous materials that contain multiple phases in the microstructure. The mechanical failure of such materials is a natural multi–scale effect since cracks typically nucleate in regions of defects on the microscopic scale. The modeling strategy for solving the crack problem concerns simultaneously the m...
متن کاملFailure Prediction during uniaxial Superplastic Tension using Finite Element Method
Superplastic materials show a very high ductility. This is due to both peculiar process conditions and material intrinsic characteristics. However, a number of superplastic materials are subjected to cavitation during superplastic deformation. Evidently, extensive cavitation imposes significant limitations on their commercial application. The deformation and failure of superplastic sheet metals...
متن کامل