Energy Efficiency and Scalability of Metallic Nanoparticle Production Using Arc/Spark Discharge
نویسندگان
چکیده
The increased global demand for metallic nanoparticles for an ever growing number of applications has given rise to a need for larger scale and more efficient nanoparticle (NP) production processes. In this paper one such process is evaluated from the viewpoints of scalability and energy efficiency. Multiple setups of different scale of an arc/spark process were evaluated for energy efficiency and scalability using exergy analysis, heat loss evaluation and life cycle impact assessment, based on data collected from EU FP7 project partners. The energy efficiency of the process is quite low, with e.g., a specific electricity consumption (SEC) of producing ~80 nm copper NP of 180 kWh/kg while the thermodynamic minimum energy need is 0.03 kWh/kg. This is due to thermal energy use characteristics of the system. During scale-up of the process the SEC remained similar to that of smaller setups. Loss of NP mass in the tubing of larger setups gives a lower material yield. The variation in material yield has a significant impact on the life cycle impact for the produced NP in both the Human Health and Ecosystem Quality categories while the impact is smaller in the Global Warming and Resource Depletion categories.
منابع مشابه
Tesla coil discharges guided by femtosecond laser filaments in air
Related Articles A low-voltage spark-discharge method for generation of consistent oscillating bubbles Rev. Sci. Instrum. 84, 014705 (2013) Note: Gliding arc discharges with phase-chopped voltage supply for enhancement of energy efficiency in volatile organic compound decomposition Rev. Sci. Instrum. 84, 016105 (2013) Microwave scattering from laser spark in air J. Appl. Phys. 112, 063101 (2012...
متن کاملNanoparticle Formation by Laser Ablation and by Spark Discharges — Properties, Mechanisms, and Control Possibilities
Laser ablation (LA) and spark discharge (SD) techniques are commonly used for nanoparticle (NP) formation. The produced NPs have found numerous applications in such areas as electronics, biomedicine, textile production, etc. Previous studies pro‐ vide us information about the amount of NPs, their size distribution, and possible ap‐ plications. On one hand, the main advantage of the LA method is...
متن کاملOptimization of Non-volatile Memory Cell and Energy Consumption in Robot Systems by Synthesized Silicon Nanoparticles via Electrical Discharge
In this paper, we propose to optimize manufacturing methods of memory cells by produced silicon nanoparticles via electrical spark discharge of silicon electrodes in water to reduce the energy consumption for low power applications. The pulsed spark discharge with the peak current of 60 A and a duration of a single discharge pulse of 60 µs was used in our experiment. The structure, morphology, ...
متن کاملImproving the performance of Lithium-Sulfur Batteries using Sulfur-(TiO2/SiO2) yolk–shell Nanostructure
Lithium-Sulfur (Li-S) batteries are considered as one of the promising candidates for next-generation Li batteries in near future. Although, these batteries are suffering from certain drawbacks such as rapid capacity fading during the charge and discharge process due to the dissolution of polysulfides. In this paper, Sulfur/metal oxide (TiO2 and SiO2) yolk–shell structures have been successfull...
متن کاملبهینهسازی ترکیب نانوساختار کربنی به عنوان زیر لایه در رشد الکتروکاتالیستهای کبالت
Global warming and other adverse environmental effects of fossil fuels have forced humans to consider clean and renewable energy resources. In this context, hydrogen production from water splitting reaction is a key approach. In order to reduce required overpotential for water oxidation reaction, it is necessary to use low cost and earth abundant electrocatalysts like Co, Cu, Fe, Mn, Ni and Zn ...
متن کامل