Overcoming the bandgap limitation on solar cell materials
نویسندگان
چکیده
Articles you may be interested in Potential-induced degradation in solar cells: Electronic structure and diffusion mechanism of sodium in stacking faults of silicon Radiative efficiency limits of solar cells with lateral band-gap fluctuations Appl.
منابع مشابه
Positron annihilation studies of the AlOx/SiO2/Si interface in solar cell structures
Related Articles Overcoming the bandgap limitation on solar cell materials Appl. Phys. Lett. 100, 083901 (2012) Energy transfer in CaYAlO4: Ce3+, Pr3+ for sensitization of quantum-cutting with the Pr3+-Yb3+ couple J. Appl. Phys. 111, 043104 (2012) GaAs/GaInNAs quantum well and superlattice solar cell Appl. Phys. Lett. 100, 073508 (2012) Understanding the operation of quantum dot intermediate ba...
متن کاملImproving the performance of cadmium telluride solar cell (CdTe) with different buffer layers
In this paper, the performance of the buffer layer of Cadmium Telluride (CdTe) thin film solar cell was optimized using SCAPS software. At first, five different buffer layers including CdS, In2S3, ZnO, ZnSe and ZnS with variable thicknesses from 10 to 100 nm have been replaced in the structure of the solar cell and it has been observed. As the thickness of the buffer layer is increased, the eff...
متن کاملInvestigation of the Effect of Band Offset and Mobility of Organic/Inorganic HTM Layers on the Performance of Perovskite Solar Cells
Abstract: Perovskite solar cells have become an attractive subject in the solar energydevice area. During ten years of development, the energy conversion efficiency has beenimproved from 2.2% to more than 22%, and it still has a very good potential for furtherenhancement. In this paper, a numerical model of the perovskite solar cell with thestructure of glass/ FTO/ TiO2/...
متن کاملHigh-Efficiency Solar Cell Concepts: Physics, Materials, and Devices
Over the past three decades, significant progress has been made in the area of high-efficiency multijunction solar cells, with the effort primarily directed at current-matched solar cells in tandem. The key materials issues here have been obtaining semiconductors with the required bandgaps for sequential absorption of light in the solar spectrum and that are lattice matched to readily available...
متن کاملSemi-transparent polymer solar cells with excellent sub-bandgap transmission for third generation photovoltaics.
Semi-transparent organic photovoltaics are of interest for a variety of photovoltaic applications, including solar windows and hybrid tandem photovoltaics. The figure shows a photograph of our semi-transparent solar cell, which has a power conversion efficiency of 5.0%, with an above bandgap transmission of 34% and a sub-bandgap transmission of 81%.
متن کامل