Diametral tensile strength and Vickers hardness of a composite after storage in different solutions.
نویسندگان
چکیده
This study evaluated the Vickers hardness (VHN) and diametral tensile strength (DTS) of the composite Z100 (3M ESPE) cured with: Quartz-Tungsten-Halogen light curing unit (QTH) (700mW/cm2- 40 s) and Argon laser (1,000mW/cm2- 10 s). Specimens of 2 mm depth and 8 mm diameter were immersed for 30 days at 37 degrees C in different storage means: water, alcohol, acetic acid, propionic acid and dry (control). The DTS (n = 8) was determined with a crosshead speed of 0.5 mm/min. The VHN (n = 8) test was carried out using a 50 g load for 60 s. Statistical analysis was performed by two-way ANOVA and Tukey's test (alpha = 0.05). The relationship between VHN and DTS was observed by Pearson correlation. The light source was not significant in both tests (VHN: P < 0.18; DTS: P < 0.92), but the factor storage showed significance (P < .001). Mechanical properties of the control group were statistically superior to those of the other storage groups (VHN = 102.2; DTS = 42.3 MPa). The alcohol group showed the lowest VHN (93.3) and DTS (33.8 MPa) values, which were similar to values for propionic (VHN = 97.5; DTS = 35.9 MPa) and acetic acids (VHN = 97.8; DTS = 36.1 MPa), but different from that of water (VHN = 102.2; DTS = 42.3 MPa). The relationship between VHN and DTS values presented a positive correlation (r2 = 0.90; P < 0.01).
منابع مشابه
The effect of curing intensity on mechanical properties of different bulk-fill composite resins
OBJECTIVE The purpose of this study was to investigate the effects of two curing light intensities on the mechanical properties (Vickers microhardness, compressive strength, and diametral tensile strength) of bulk-fill resin-based composites (RBCs). MATERIALS AND METHODS Four commercially available bulk-fill RBCs (Tetric® N-Ceram, SonicFill™, Smart Dentin Replacement (SDR™) Posterior Flowable...
متن کاملDiametral Tensile Strength, Flexural Strength, and Surface Microhardness of Bioactive Bulk Fill Restorative.
AIM The aim was to perform comparative analysis of bioactive, contemporary bulk-fill resin-based composites (RBCs) and conventional glass-ionomer materials for flexural strength (FS), diametral tensile strength (DTS), and Vickers hardness number (VHN) in the presence of thermocycling. MATERIALS AND METHODS Five restorative materials [Tetric N-Ceram Bulk Fill; smart dentin replacement (SDR) Fl...
متن کاملMechanical Properties of Calcium Fluoride-Based Composite Materials
Aim of the study was to evaluate mechanical properties of light-curing composite materials modified with the addition of calcium fluoride. The study used one experimental light-curing composite material (ECM) and one commercially available flowable light-curing composite material (FA) that were modified with 0.5-5.0 wt% anhydrous calcium fluoride. Morphology of the samples and uniformity of CaF...
متن کاملCrystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies
In-situ alumina-zirconia composite bodies were fabricated by heat treatment of gibbsite-zircon-kaolinite mixture at 1450℃. The current research investigated crystallization behavior and mechanical properties of the mentioned mixture in the presence of 5 wt.% MgO as an additive. X-ray diffraction (XRD) results showed that alumina, zirconia, and magnesium aluminosilicate were crystallized during ...
متن کاملبررسی و مقایسه اثرات عملیات حرارتی RRA، T73 و T6 بر سختی، استحکام کششی و خمشی آلیاژ آلومینیم 7075
In the present article, RRA, T73 and T6 heat treatments were carried out to improve mechanical properties of 7075 aluminum alloy and its hardness, tensile and bending strengths were evaluated. For this purpose, solution annealing was performed at 530 ºC for 16 h. For T6 treatment, aging was executed at 150 ºC for 24 h after solution annealing. In T73, aging treatment was done in two s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of oral science
دوره 49 1 شماره
صفحات -
تاریخ انتشار 2007