Additive Manufacturing Processes State of the Art and Vison for Rm
نویسنده
چکیده
The paper presents the basics and concepts of RM, state of the art with RM potential of RM, possible implementation of RM, and also with a practical example demonstrate current trends in product customization, where RM is enabling technology.
منابع مشابه
MICROSTRUCTURE, HARDNESS AND SURFACE ROUGHNESS CHARACTERIZATION OF EBM FABRICATED Ti-6Al-4V SAMPLES
Electron beam melting (EBM) is among the modern additive manufacturing processes whereby metal powders are selectively melted to produce very complicated components with superior mechanical properties. In this study, microstructure, hardness, and surface roughness of EBM fabricated Ti6Al4V samples were characterized. The results showed that the microstructure consisted of epitaxially-grown prim...
متن کاملAdvanced Material Strategies for Next-Generation Additive Manufacturing
Additive manufacturing (AM) has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials ...
متن کاملEngineering of Membrane Gas Separation Processes: State of The Art and Prospects
Membrane processes are today one of the key technologies for industrial gas separations and show growing interest for future use in sustainable production systems. Besides materials development, dedicated engineering methods are of major importance for the rigorous and most efficient design of membrane units and systems. Starting from approaches based on simplified hypotheses developed in the 5...
متن کاملAn Expert Rule-based System for Additive Manufacturing Selection
This paper assesses the possibility of using Rapid Manufacturing (RM) as a final manufacturing route through a comparison of RM processes capabilities vs. conventional manufacturing processes. This is done by means of a computer-aided system (RMADS) intended to guide the designer in the selection of optimum production parameters according to typical requirements of the first design stages. A nu...
متن کاملMICROSTRUCTURE CHARACTERISTIC OF ALUMINUM TITANATE SYNTHESIED BY BOTH SOLID- STATE AND SOL-GEL PROCESSES
A comparing study on formation and microstructure features of aluminum titanate is investigated through both solid-state and sol-gel processes. Aluminum titanate formed by firing at 1350ºC and 1450ºC for 4h in solid-state process. In the sol-gel process formation of submicron sized particles is followed by addition of sucrose into the transparent sol. XRD analysis was confirmed the formation of...
متن کامل