Finite Element Simulation (fes) of the Fullering in Device with Movable Elements
نویسنده
چکیده
V. A. Andreyachshenko Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda In the paper there is studied stressed-and-strained state formed in a billet by fullering in a tool with movable elements. It is determined that compressing stresses prevail in the studied tool; they improve the quality of the processed billets. Even maximum main normal stresses have compressing characteristics at slight tensile stresses. Stressed-and-strained state was studied by using the computer simulation method which was performed in the DEFORM 3D software. The obtained results confirm the efficiency of the new tool in processing cylindrical billets.
منابع مشابه
Torsion Analysis of High-Rise Buildings using Quadrilateral Panel Elements with Drilling D.O.F.s
Generally, the finite element method is a powerful procedure for analysis of tall buildings. Yet, it should be noted that there are some problems in the application of many finite elements to the analysis of tall building structures. The presence of artificial flexure and parasitic shear effects in many lower order plane stress and membrane elements, cause the numerical procedure to converge in...
متن کاملExperimental and Neural Network Prediction of Elongation and Spread after First Stage of Fullering
Fullering process is a type of open die forging. In this research, elongation and maximum sideways spread in final shape of a billet after the first blow of a fullering process are predicted by designing a back propagation multilayer perceptron neural network. Several experiments are conducted using lead as the model material. Billets with three different square cross-sections are used in these...
متن کاملAn Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements
In this paper, the finite element analysis of two-dimensional linear viscoelastic problems is performed using quadrilateral complex Fourier elements and, the results are compared with those obtained by quadrilateral classic Lagrange elements. Complex Fourier shape functions contain a shape parameter which is a constant unknown parameter adopted to enhance approximation’s accuracy. Since the iso...
متن کاملFEM SIMULATION OF NON-AXISYMMETRIC STRETCH FLANGE FORMING OF ALUMINUM ALLOY 5052 BASED ON SHELL TYPE ELEMENTS
Finite element simulation of stretch flanging process was carried out in order to investigate the effect of process parameters on maximum thinning (%) in stretch flanging process. Influences of initial flange length, punch die clearance, width of sheet metal blank and blank holding force were investigated on maximum thinning (%). Finite element simulation was done using FEM software package ABA...
متن کاملComputational and Programming Aspects of Transition Elements in a Three-dimensional Finite Element Program
The performance of any finite element (FE) structural analysis is directly related to the global number of nodes and degrees of freedom (DOF) of the discretized structure and mesh distribution attributes. It is obvious that the appropriate numerical analysis needs finer elements in the zone of interest, e.g. zone of high stress concentration and intensity, and coarser elements for farther porti...
متن کامل