CFD simulation of cross-ventilation for a generic isolated building: impact of computational parameters

Accurate CFD simulation of coupled outdoor wind flow and indoor air flow is essential for the design and evaluation of natural cross-ventilation strategies for buildings. It is widely recognized that CFD simulations can be very sensitive to the large number of computational parameters that have to be set by the user. Therefore, detailed and generic sensitivity analyses of the impact of these parameters on the simulation results are important to provide guidance for the execution and evaluation of future CFD studies. A detailed review of the literature indicates that there is a lack of extensive generic sensitivity studies for CFD simulation of natural cross-ventilation. In order to provide such a study, this paper presents a series of coupled 3D steady RANS simulations for a generic isolated building. The CFD simulations are validated based on detailed wind tunnel experiments with Particle Image Velocimetry. The impact of a wide range of computational parameters is investigated, including the size of the computational domain, the resolution of the computational grid, the inlet turbulent kinetic energy profile of the atmospheric boundary layer, the turbulence model, the order of the discretization schemes and the iterative convergence criteria. Specific attention is given to the problem of oscillatory convergence that was observed during some of these coupled CFD simulations. Based on this analysis, the paper identifies the most important parameters. The intention is to contribute to improved accuracy, reliability and evaluation of coupled CFD simulations for cross-ventilation assessment.