Full- & Reduced-Order State-Space Modeling of Wind Turbine Systems with Permanent-Magnet Synchronous Generator
نویسندگان
چکیده
Wind energy is an integral part of nowadays energy supply and one of the fastest growing sources of electricity in the world today. Accurate models for wind energy conversion systems (WECSs) are of key interest for the analysis and control design of present and future energy systems. Existing control-oriented WECSs models are subject to unstructured simplifications, which have not been discussed in literature so far. Thus, this technical note presents are thorough derivation of a physical state-space model for permanent magnet synchronous generator WECSs. The physical model considers all dynamic effects that significantly influence the system’s power output, including the switching of the power electronics. Alternatively, the model is formulated in the (a, b, c)and (d, q)-reference frame. Secondly, a complete control and operation management system for the wind regimes II and III and the transition between the regimes is presented. The control takes practical effects such as input saturation and integral windup into account. Thirdly, by a structured model reduction procedure, two state-space models of WECS with reduced complexity are derived: a non-switching model and a non-switching reduced-order model. The validity of the models is illustrated and compared through a numerical simulation study. Index Terms Wind turbine system, Wind energy conversion system, dynamic modeling, control design model, control system, operation management, switching behavior, nonlinear dynamics, model reduction, comparative simulation Statement: This work has been submitted for publication in IEEE Transactions on Control Systems Technology.
منابع مشابه
Design of a Permanent-Magnet Synchronous Generator for a 2 MW Gearless Horizontal-Axis Wind Turbine According to its Capability Curves
Permanent-Magnet Synchronous Generators (PMSGs) exhibit high efficiency and power density, and have already been employed in gearless wind turbines. In the gearless wind turbines, due to the removal of the gearbox, the cogging torque is an important issue. Therefore, in this paper, at first, design of a Permanent-Magnet Synchronous Generator for a 2MW gearless horizontal-axis wind turbine, acco...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملModeling of a Rectifier Connected PMSG Applied in Wind Energy Conversion System Using State Machine Approach
Accurate modeling of the wind energy conversion system is necessary to design and implementation of the control loop for the generator and the frequency converter, in order to extract maximum power from the wind and to investigate the effects of interconnection between wind farms and power system. In this paper the combination of a permanent magnet synchronous generator loaded with a diode rect...
متن کاملA Fuzzy Controlled PWM Current Source Inverter for Wind Energy Conversion System
In recent years, there has been a fast growth in wind energy conversion system (WECS). There are two general types of wind turbines in WECS: fixed speed wind turbines and varying speed wind turbines.Permanent magnet synchronous generator (PMSG) is one of the most attractive generators for the varying speed turbine WECS.In this paper, a fuzzy controller is proposed to control the current source ...
متن کاملExperimental and 3D Finite Element Analysis of a Slotless Air-Cored Axial Flux PMSG for Wind Turbine Application
In this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3D finite element modeling and experimental tests. The structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- CoRR
دوره abs/1802.00799 شماره
صفحات -
تاریخ انتشار 2018