Microstructure-sensitive investigation of magnesium alloy fatigue
نویسندگان
چکیده
منابع مشابه
Microstructure and Fatigue Characteristic of AM60B Magnesium Alloy
This paper summarizes and reviews the findings of our research on AM60B magnesium alloy conducted in past 8 years. It essentially covers three categories: microstructural study, environmental effect, and fatigue crack growth rate of AM60B. The experimental and numerical studies on the influence of casting defects on this particular material’s properties are reviewed in the first part. It has be...
متن کاملStructure–property relations of cyclic damage in a wrought magnesium alloy
The fatigue properties of an extruded Mg–3Al–0Mn magnesium alloy component were evaluated experimentally. Fully reversed, strain control fatigue tests were conducted on specimens extracted from regions with a varying grain size and texture. Scanning electron microscopy was employed to establish structure–property relations between microstructure and cyclic damage. Relations were drawn between m...
متن کاملFATIGUE BEHAVIOUR OFA ROLLED AZ31 MAGNESIUM ALLOYS PREPARED BY EPAND BB CONDITIONS
Abstract: Rotating bending fatigue tests have been performed using smooth specimens of a rolled AZ31 magnesium alloy in laboratory air at ambient temperature. Fatigue strength and characteristic was evaluated and fracture mechanism was discussed on the basis fracture surface analysis. Electrical polishing (EP) as well as deep rolling (ball burnishing (BB)) U-notched specimens were performed on ...
متن کاملRatcheting crystal plasticity modeling in microstructure of magnesium alloy under stress-controlled cyclic tensile loading with non-zero mean stress
Todays, the requirement of lowering the vehicle weight for the reduction of the fuel consumption and emissions, one of the methods considered by designers is to use the ligh magnesium alloy under cylclic loadings. In this article, considering the microstructure of the AZ91D magnesium alloy, its crystalline structure, a model for predicting the ratcheting behavior of this alloy was adapted and v...
متن کاملA new low cycle fatigue lifetime prediction model for magnesium alloy based on modified plastic strain energy approach
Nowadays, the technology intends to use materials such as magnesium alloys due to their high strength to weight ratio in engine components. As usual, engine cylinder heads and blocks has made of various types of cast irons and aluminum alloys. However, magnesium alloys has physical and mechanical properties near to aluminum alloys and reduce the weight up to 40 percents. In this article, a new ...
متن کامل