Comparison of Grinding Characteristics of Converter Steel Slag with and without Pretreatment and Grinding Aids
نویسندگان
چکیده
Jihui Zhao 1,*, Dongmin Wang 2, Peiyu Yan 1 and Wenping Li 2 1 Institute of Building Materials, Department of Civil Engineering, Tsinghua University, Beijing 100084, China; [email protected] 2 School of Chemical & Environmental Engineering, China University of Mining & Technology, Beijing 100083, China; [email protected] (D.W.); [email protected] (W.L.) * Correspondence: [email protected]; Tel.: +86-159-0124-5174
منابع مشابه
WEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES
Nowadays steel balls wear is a major problem in mineral processing industries and forms a significant part of the grinding cost. Different factors are effective on balls wear. It is needed to find models which are capable to estimate wear rate from these factors. In this paper a back propagation neural network (BPNN) and multiple linear regression (MLR) method have been used to predict wear rat...
متن کاملGrinding-aid effect on the colour properties (Ry, whiteness and yellowness) of calcite in stirred media milling
This study investigates the influence of some chemical additives such as methanol, ethanol, sodium oleat, chloroform and sodium hexametaphosphate (SHMP) on the dry fine grinding of calcite (X50= 33 µm) using a stirred media mill. The experiments were carried out by a batch operation, and the change in colour properties (Ry, whiteness and yellowness) of calcite powder. The results showed that th...
متن کاملبررسی آثار سرباره کنورتور بر خصوصیات شیمیایی خاکهای اسیدی
Lintz-Donawitz (LD) converter slag, a by-product of the iron and steel-making industry is produced in large quantities in Isfahan, Iran. The slag contains 52.8 and 2.2% (w/w) CaO and MgO, respectively. To determine the influence of LD slag on the chemical characteristics of three acid soils from Gilan, an incubation study was conducted. The soil samples were collected from 0-30 cm of rice and t...
متن کاملبررسی آثار سرباره کنورتور بر خصوصیات شیمیایی خاکهای اسیدی
Lintz-Donawitz (LD) converter slag, a by-product of the iron and steel-making industry is produced in large quantities in Isfahan, Iran. The slag contains 52.8 and 2.2% (w/w) CaO and MgO, respectively. To determine the influence of LD slag on the chemical characteristics of three acid soils from Gilan, an incubation study was conducted. The soil samples were collected from 0-30 cm of rice and t...
متن کاملAn investigation of the corrosive wear of steel balls in grinding of sulphide ores
Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry an...
متن کامل