Application Procedure for Optimized Placement of Buckling Restrained Braces in Reinforced Concrete Building Structures
نویسندگان
چکیده
Abstract—The optimal design procedure of buckling restrained braces (BRBs) in reinforced concrete (RC) building structures can provide the distribution of horizontal stiffness of BRBs at each story, which minimizes story drift response of the structure under the constraint of specified total stiffness of BRBs. In this paper, a simple rule is proposed to convert continuous horizontal stiffness of BRBs into sectional sizes of BRB which are available from standardized section list assuming realistic structural design stage.
منابع مشابه
Evaluating the Performance of the Buckling Restrained Braces in Tall Buildings with peripherally braced frames
In recent years, seismic design of structures has been undergoing significant changes due to increasing demand for optimization and minimizing the level of damage and reducing the cost of structural repairs. Development of analytical methods and remarkable improvements of computer performance have been among the factors which influenced the design of structures. A lot of research has been condu...
متن کاملDevelopment of Equivalent Force Control Method for Pseudo- Dynamic and Real-time Substructure Tests
The equivalent force control (EFC) method replaces numerical iteration with a feedback control strategy to solve the nonlinear equations of motion in pseudodynamic and real-time substructure tests (RST) using an implicit integration method. The EFC method and its further development with an energy conserving integration method are presented in this paper. The effectiveness and accuracy of the E...
متن کاملComparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock
Due to low stiffness of braces after yielding, the structures with buckling-restrained braces (BRBs) experience high residual drifts during an earthquake, which can be intensified by aftershocks and causes considerable damages to structures. Also, due to poor distribution of stiffness, this problem is exacerbated for irregular structures. Recently, the yielding brace system (YBS) has been intro...
متن کاملEffect of the Height Increasing on Steel Buildings Retrofitted by Buckling Restrained Bracing Systems and TTD Damper
The Behavior of conventional braced frames, are not the same in tension and compression. This problem can be improved by prevention of buckling under compressive loads, which is called buckling restrained brace(BRB). In this field TTD metal damper also have much attention due to simplicity in construction and execution. This damper is recommended because of accessing to better performance than ...
متن کاملSeismic evaluation of reinforced concrete moment frames retrofitted with steel braces using IDA and Pushover methods in the near-fault field
One of the methods for retrofitting reinforced concrete moment frames is the use of steel braces. In this research, the seismic performance of a double-skinned concrete framing system reinforced with two concentric (CBF) and eccentric (EBF) steel bracing, was investigated under seven near-fault earthquake records of varying intensity. For this purpose, two ten-story concrete frames with five sp...
متن کامل