Test Analysis of Friction Moment between Ball and Cage of Miniature Bearing at Very Low Speed
نویسندگان
چکیده
In some applications, especially for the attitude control of navigation system, the friction moment of instrument ball bearings is one of the much more important factors. Its magnitude and fluctuation affect not only the energy transfer but also the accuracy of signal transfer even though the bearings work at very low speed. Experimental analysis showed that the cage rotated with a minor fluctuation along its orbital axis and even this minor fluctuation could also make a great contribution to the moment for the ball bearing. A simplified model of deformation within the contact of ball and cage was built to deduce the contact time. Combined with the experimental results, the angular acceleration were obtained by the model of contact, then the value of moment due to sliding, which induced the fluctuation of cage, between ball and ribbon cage pockets of miniature bearing were obtained.
منابع مشابه
Using Miniature Cone Penetration Test (Mini-CPT) to determine engineering properties of sandy soils
In-situ testing techniques have proven to be successful in improving the speed and reliability of geotechnical investigations. One of the most common in-situ methods in engineering geology and site investigation is Cone Penetration Test (CPT), which is mainly used for characterization of soils, as it is a robust, simple, fast, reliable and economic test that can provide continuous soundings of ...
متن کاملThe Stribeck memorial lecture
Stribeck’s publications ‘Kugellager für beliebige Belastungen’ and ‘Die wesentlichen Eigenschaften der Gleitund Rollenlager’ were remarkable for their time. Many of the findings were revolutionary and are still considered quite modern. The method used by Stribeck to calculate load distribution between the balls within a ball bearing is still used today, otherwise, a full finite element analysis...
متن کاملFault Detection of Anti-friction Bearing using Ensemble Machine Learning Methods
Anti-Friction Bearing (AFB) is a very important machine component and its unscheduled failure leads to cause of malfunction in wide range of rotating machinery which results in unexpected downtime and economic loss. In this paper, ensemble machine learning techniques are demonstrated for the detection of different AFB faults. Initially, statistical features were extracted from temporal vibratio...
متن کاملEffective of Main Bearing Bolt Manufacturing Parameters on Functional Performance in High Speed Diesel Engine using Torque-Angle Method
In marine diesel engine, main bearing bolts (M18×1.5) withstand large tensile and cyclic loads to keep the crank shaft, bearing whit acceptable clearance and precision clamping force at high crank speed like 3100 rpm. In this research, the relationship between torque and clamp force, the friction coefficient, the effect of number of tightening and bearing conditions on the new manufactured bolt...
متن کاملTraction and Efficiency Performance of Ball Type CVTs
This paper concerns the design and analysis, of a ball type continuously variable transmission, (B-CVT). This B-CVT has a simple kinematic structure, and same as a toroidal CVT, transmits power by friction on the contact points between input and output discs, that are connected to each other by balls. After, a brief introduction of our B-CVT structure, the performa...
متن کامل