Modeling of Bend Losses in Single-Mode Optical Fibers
نویسندگان
چکیده
The dissemination of the optical fibers structures, especially in the access network had impose new challenges. In this work we present the study of macro bending losses in single mode optical fibres, namely the bend loss as a function of the Radius of Bend for SMF fiber are given. The experimental results are compared with the results from the improved formula for bend loss determinate by R. Shermer and J. Cole.
منابع مشابه
Theoretical and experimental investigations of macro-bend losses for standard single mode fibers.
Modeling of macro-bend losses for single mode fibers with multiple cladding or coating layers is presented. Macro-bend losses for standard single mode fibers (SMF28) are investigated theoretically and experimentally, showing that the inner primary coating layer of SMF28 has a significant impact on the bend losses and most of the radiation field is absorbed in the inner primary coating layer of ...
متن کاملPolarisation Dependence of Bend Loss for a Standard Singlemode Fiber
Polarization dependence of bend loss caused by the polymer coating layer for a standard singlemode fiber (SMF28) is investigated theoretically and experimentally. Bend loss for SMF28 for both the TE and TM mode is calculated separately. Normalized polarization dependent loss is proposed for the characterization of the polarization sensitivity of bend loss for different bend radii. Corresponding...
متن کاملNovel Single Mode Fiber (SMF) Ultra Low Loss Design in 1550 M Window considering PMD, DGD and various Bending Radii
29 ABSTRACT Bend intensive single mode fibers are attractive for fiber to the home (FTTH) applications because they can lower the installation cost and improve the system performance. For in home wiring applications, bend radii in the range of 5 mm are very common [7] and bending losses must be kept minimum. Bending losses of less than 0.1 db/turn will ensure robust network performance under pr...
متن کاملFull-vectorial coupled mode theory for the evaluation of macro-bending loss in multimode fibers. application to the hollow-core photonic bandgap fibers.
In the hollow core photonic bandgap fibers, modal losses are strongly differentiated, potentially enabling effectively single mode guidance. However, in the presence of macro-bending, due to mode coupling, power in the low-loss mode launched into a bend is partially transferred into the modes with higher losses, thus resulting in increased propagation loss, and degradation of the beam quality. ...
متن کاملComparative study of the effective single mode operational bandwidth in sub-wavelength optical wires and conventional single-mode fibers.
We present the first experimental comparison of effective single mode operation bandwidth in sub-wavelength optical wires (SOWs) and conventional single-mode fibers (SMFs). The full transmission spectrum, half-turn bend loss and mode field diameter were measured and compared for a variety of SMFs of different cut-off wavelength and a SOW. The SOW was shown to offer an enormously broadband singl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009