Collision Avoidance in Next-generation Fiber Positioner Robotic Systems for Large Survey Spectrographs
نویسندگان
چکیده
Some of the next generation massive spectroscopic survey projects, plan to use thousands of fiber positioner robots packed at a focal plane to quickly move in parallel the fiber-ends from the previous to the next target points. The most direct trajectories are prone to collision that could damage the robots and impact the survey operation. We thus present here a motion planning method based on a novel decentralized navigation function for collision-free coordination of fiber positioners. The navigation function takes into account the configuration of positioners as well as the actuator constraints. We provide details for the proof of convergence and collision avoidance. Decentralization results in linear complexity for the motion planning as well as dependency of motion duration with respect to the number of positioners. Therefore the coordination method is scalable for large-scale spectrograph robots. The short in-motion duration of positioner robots, will thus allow the time dedicated for observation to be maximized.
منابع مشابه
Lab#7: Robotic walker survey paper
Next generation Robotic Walker designers are investigating navigation functions to help the elderly and disabled people to remain healthier and stay socially active. However, unattended safety concern will highly likely led to a drop in users’ acceptance and organizational uptake of this technique. If safety remains to be a concern of both carers and users, this technique will possibly be at a ...
متن کاملCollision-Free Coordination of Fiber Positioners in Multi-object Spectrographs
Many fiber-fed spectroscopic survey projects, such as DESI, PFS and MOONS, will use thousands of fiber positioners packed at a focal plane. To maximize observation time, the positioners need to move simultaneously and reach their targets swiftly. We have previously presented a motion planning method based on a decentralized navigation function for the collision-free coordination of the fiber po...
متن کاملA Formally Verified Hybrid System for the Next-Generation Airborne Collision Avoidance System (CMU-CS-14-138)
The next-generation Airborne Collision Avoidance System (ACAS X) is intended to be installed on all large aircraft to give advice to pilots and prevent mid-air collisions with other aircraft. It is currently being developed by the Federal Aviation Administration (FAA). In this paper we determine the geometric configurations under which the advice given by ACAS X is safe under a precise set of a...
متن کاملOptimizing the Next Generation Collision Avoidance System for Safe, Suitable, and Acceptable Operational Performance
The Traffic Alert and Collision Avoidance System (TCAS) is mandated worldwide on large commercial aircraft and has been shown to substantially reduce the risk of midair collision. However, the logic used to select pilot advisories is difficult to modify and does not easily support new surveillance inputs. The next generation system, called Airborne Collision Avoidance System (ACAS X), currently...
متن کاملA New Approach for Designing Safer Collision Avoidance Systems
The Traffic Alert and Collision Avoidance System (TCAS) has been shown to significantly reduce the risk of mid-air collision and is currently mandated worldwide on all large transport aircraft. Engineering the collision avoidance logic was a very costly undertaking that spanned several decades. The development followed an iterative process where the logic was specified using pseudocode, evaluat...
متن کامل