HIGH PERFORMANCE CONTROL OF A THREE-LEVEL IGBT lNVERTER FED AC DRlVE - Industry Applications Conference, 1995. Thirtieth IAS Annual Meeting, IAS '95., Conference Record
نویسنده
چکیده
Three-level PWM inverters have been increasingly employed in industry and traction applications where high power and efficiency energy conversions are required. This paper presents a high performance control of a cage induction motor drive fed by a 100 Hp three-level IGBT inverter operating at a low switching frequency. A practical math model of the drive control system is established to aid in the control design to improve the system stability, dynamic performance and robustness over a wide speed range. The modeling and the simulation in Matlab/Simulink facilitate the self-tuning of the regulators in the multi-loop systems. The field oriented control and three-level space-vector modulation together with the drive protection and diagnostics are implemented in software based on a DSP TMS320C31. Experimental results based on the IGBT inverter prototype are given to verify the design and performance. Test results in motor common-mode voltage reduction and inverter neutral-point potential control are also briefly presented.
منابع مشابه
A Direct Field Oriented Induction Machine Drive with Robust Flux Estimator for Position Sensorless C - Industry Applications Conference, 1995. Thirtieth IAS Annual Meeting, IAS '95., Conference Record
The rotor flux is estirnatcd for a direct field oriented induction machine drive using a voltage-current mode algorithm, or physical based algorithm. The estimated rotor flux is used to synthesize the components of the rotation matrix, szn(@,) and cos(@,). These angles are critical in transforming the command currents to the stationary frame such tha t field orientation is maintained. The princ...
متن کاملReal Time Simulator for the Runout Table of Hot Strip Mills - Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Reco
In a hot strip mill, the strip is cooled by spraying water from top and bottom on the RunOut Table (ROT), before the strip is coiled. The desired mechanical properties and metallurgical structure of the strip is achieved by controIling the cooling rate and temperature of the strip on the ROT. This paper describea a novel real time simulator for ROTs. The simulator has been implemented in parall...
متن کاملStrategies and a Computer Aided Package for Design and Analysis of Induction Machines for Inverter-D - Industry Applications Conference, 1995. Thirtieth IAS Annual Meeting, IAS '95., Conference Record
Induction machines designed for inverterdriven variable speed systems is different from those powered directly from utility power lines. In this paper, the design strategies of inverter-driven induction machines are discussed. This is followed by a description of a computer aided design and analysis package specifically for this purpose. The program package permits integration design of machine...
متن کاملRegenerative and ride-through capability for AC drives through thyristor-based extensions of the diode front-end - Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the
This paper presents SCR-based circuit extensions to a diode rectifier to allow regeneration during braking and ride-through during voltage sags. The proposed topology uses two line-commutated SCR bridges – one connected to the dc bus rails and the other to the dc bus center-tap. The inverting SCR bridge connected to the dc bus rails transfers energy from the dc link to the mains during regenera...
متن کاملAutomatic Learning Techniques for on-line Control and Optimization of Transformer Core Manufacturing - Industry Applications Conference, 1999. Thirty-Fourth IAS Annual Meeting. Conference Record of the
In this paper, a novel computer based learning framework that bas been developed and applied for the on-line control and optimization of transformer core manufacturing process is presented. Tbe proposed framework aims at predicting core losses of wound core distribution transformers at the early stages of transformer construction. Moreover. it is used to improve the grouping process of the indi...
متن کامل