Innovative Metal System for IGBT Press Pack Modules

نویسندگان

  • S. Gunturi
  • J. Assal
  • D. Schneider
  • S. Eicher
چکیده

Two important design aspects encountered in IGBT press pack modules used for HVDC applications are short circuit failure mode (SCFM) and intermittent operating life (IOL) capabilities. The requirement that press-pack IGBT (PPI) fail safely into a short causes a design conflict with the module’s desired capability to survive a high number of power cycles in normal operation. An innovative materials design to optimise this trade-off is described. The failure mechanism that leads to an open circuit after the PPI has operated extensively in SCFM was found to be liquid metal corrosion of the baseplate followed by the formation of intermetallics with poor conductivity and silicone gel degradation. The beneficial effects of dry interface plating materials to avoid thermomechanical fatigue under IOL conditions are described.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

IGBT Press-packs for the industrial market

We present a newly developed 4500 V and 2000 A Press-Pack IGBT module for power transmission and industrial voltage drives applications. The module employs SPT IGBT chips with exceptionally low losses and high Safe Operating Area (SOA). The use of SPT IGBT chips in this Press Pack IGBT module allows for higher power densities and the package provides a highly flexible modular platform with very...

متن کامل

The Impact of Power Switching Devices on the Thermal Performance of a 10 MW Wind Power NPC Converter

Power semiconductor switching devices play an important role in the performance of high power wind energy generation systems. The state-of-the-art device choices in the wind power application as reported in the industry include IGBT modules, IGBT press-pack and IGCT press-pack. Because of significant deviation in the packaging structure, electrical characteristics, as well as thermal impedance,...

متن کامل

State of the Art of Dv/dt and Di/dt Control of Insulated Gate Power Switches

IGBT and MOSFET power switches are commonly used in power converters. MOSFET for middle power and IGBT for high power converters : gate drive circuits are used to drive such components. Some applications need to control dv/dt and di/dt from power switches to reduce electromagnetic emissions. New solutions have been introduced and tested since 1990 (conresponding to the maturation of IGBT techno...

متن کامل

IGBT modules robustness during turn-off commutation

The behaviour in terms of robustness during turn-off of power IGBT modules is presented. The experimental characterisation is aimed to identify the main limits during turn-off in power IGBT modules in typical hard switching applications. In this paper an experimental characterization of high power IGBT modules at output currents beyond RBSOA, at high junction temperatures and under different dr...

متن کامل

cooling options and challenges of high power semiconductor modules

Introduction Trends in power electronics systems and devices over the last decade have placed increasing demands on the efficiencies of the thermal management systems used for power MOSFET and IGBT modules. The pressure to decrease the size of power electronics systems and, subsequently, the module, has resulted in a 50% footprint area reduction of some IGBT modules. This has resulted in higher...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008