Analysis of the Stress and Displacement Distribution of Inferior Tibiofibular Syndesmosis Injuries Repaired with Screw Fixation: A Finite Element Study

BACKGROUND Studies of syndesmosis injuries have concentrated on cadaver models. However, they are unable to obtain exact data regarding the stress and displacement distribution of various tissues, and it is difficult to compare models. We investigated the biomechanical effects of inferior tibiofibular syndesmosis injuries (ITSIs) and screw fixation on the ankle using the finite element (FE) method. METHODOLOGY/PRINCIPAL FINDINGS A three-dimensional model of a healthy ankle complex was developed using computed tomography (CT) images. We established models of an ITSI and of screw fixation at the plane 2.5 cm above and parallel to the tibiotalar joint surface of the injured syndesmosis. Simulated loads were applied under three conditions: neutral position with single-foot standing and internal and external rotation of the ankle. ITSI reduced contact forces between the talus and fibula, helped periarticular ankle ligaments withstand more load-resisting movement, and increased the magnitude of displacement at the lower extreme of the tibia and fibula. ITSI fixation with a syndesmotic screw reduced contact forces in all joints, decreased the magnitude of displacement at the lower extreme of the tibia and fibula, and increased crural interosseous membrane stress. CONCLUSIONS/SIGNIFICANCE Severe syndesmosis injuries cause stress and displacement distribution of the ankle to change multidirectional ankle instability and should be treated by internal fixation. Though the transverse syndesmotic screw effectively stabilizes syndesmotic diastasis, it also changes stress distribution around the ankle and decreases the joint's range of motion (ROM). Therefore, fixation should not be performed for a long period of time because it is not physiologically suitable for the ankle joint.