The interaction of projectiles with tissues and the management of ballistic fractures.

نویسنده

  • J Clasper
چکیده

Wounds to the limbs are the commonest injuries seen during armed conflict and injury results from the transfer of energy from the missile to the tissues. There are a number of factors that determine the transfer of energy, and thus the extent of wounding. These include the velocity of the missile, its shape and stability, and the tissue through which the missile passes. Many of the wounds involve bone, and because of the interaction of missiles with bone, significant fractures can occur. In many previous conflicts amputation was considered the treatment of choice for many limb injuries, but with recent advances in the management of severe open fractures, many of these limbs are now salvageable. Whilst the basic principles of the initial débridement remain unchanged, techniques of fracture stabilisation and definitive soft tissue cover have changed, and it is necessary to consider these in relation to military fractures. Definitive soft tissue closure can be safely delayed until evacuation further down the medical chain, but stabilisation of the fracture must be considered at the time of initial surgery. Many of the advances in fracture management may be unsuitable for use in a military environment due to logistical constraints. In addition it is likely that wound infection will be more common with military injuries, and this will influence the treatment. This paper considers the interaction of missiles with soft tissue and bone, and discusses possible methods of fracture stabilisation in the military environment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تعیین تجربی زاویه بحرانی نفوذ در برخورد مایل پرتابه ها

Oblique impact of cylindrical projectiles with blunt, conical and hemispherical noses with different aspect ratios on metallic targets with different thicknesses is investigated and penetration critical angle is determined. Circular targets of Al1100-H12 had a diameter of 240mm and thicknesses of 1, 2 and 3mm. Steel work hardened projectiles with blunt, conical and hemispherical noses are made ...

متن کامل

Numerical and Experimental Study of Ballistic Response of Kevlar Fabric and Kevlar/Epoxy Composite

Kevlar is a type of aramid fibers which is characterized by high strength to low weight ratio. This material is widely used in bulletproof vests and helmets, in which it creates a barrier to projectiles to protect specific objectives, laminated tubes and pressure vessels, etc. In this study the ballistic behavior of Kevlar /epoxy composite and Kevlar fabric is investigated. The results showed t...

متن کامل

Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact

In this study, the behavior of filament wound nanocomposite tubes under transverse impact loading is investigated. Experimental specimens were manufactured using Epon 828 resin with 0.5, 1.5 and 3 weight percentages of nano silica. Because of the varying nanosilica weight percentages in the specimens, different behaviors were observed; increasing the weight percentage of nanoparticles increased...

متن کامل

Plastic Wave Propagation Model for Perforation of Metallic Plates by Blunt Projectiles

In this paper, a six-stage interactive model is presented for the perforation of metallic plates using blunt deformable projectiles when plastic wave propagation in both target and projectile is considered. In this analytical model, it is assumed that the projectile and target materials are rigid – plastic linear work hardened. The penetration of the projectile into the target is divided into s...

متن کامل

The Ballistic Behavior of High Strength, Low Alloy-100 Steel at Sub-zero Temperatures

The ballistic response of the high strength, low alloy (HSLA-100) steel at ambient and temperatures of -400°C, -800°C and -1960°C is investigated in this work. Lambert-jonas equation is used to fit the experimental results into a curve. The effect of quenching on ballistic behavior of HSLA-100 is also studied. The experiments are conducted on 3mm thick rectangular specimens impacted by blunt ti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the Royal Army Medical Corps

دوره 147 1  شماره 

صفحات  -

تاریخ انتشار 2001