Control of Silver Diffusion in Low-Temperature Co-Fired Diopside Glass-Ceramic Microwave Dielectrics
نویسندگان
چکیده
Electrode material for low-temperature co-fired diopside glass-ceramic used for microwave dielectrics was investigated in the present work. Diffusion of silver from the electrode to diopside glass-ceramics degrades the performance of the microwave dielectrics. Two approaches were adopted to resolve the problem of silver diffusion. Firstly, silicon-oxide (SiO₂) powder was employed and secondly crystalline phases were chosen to modify the sintering behavior and inhibit silver ions diffusion. Nanoscale amorphous SiO₂ powder turns to the quartz phase uniformly in dielectric material during the sintering process, and prevents the silver from diffusion. The chosen crystalline phase mixing into the glass-ceramics enhances crystallinity of the material and inhibits silver diffusion as well. The result provides a method to decrease the diffusivity of silver ions by adding the appropriate amount of SiO₂ and appropriate crystalline ceramics in diopside glass-ceramic dielectric materials. Finally, we used IEEE 802.11a 5.8 GHz as target specification to manufacture LTCC antenna and the results show that a good broadband antenna was made using CaMgSi₂O₆ with 4 wt % silicon oxide.
منابع مشابه
Novel ultra-low temperature co-fired microwave dielectric ceramic at 400 degrees and its chemical compatibility with base metal
A novel NaAgMoO4 material with spinel-like structure was synthesized by using the solid state reaction method and the ceramic sample was well densified at an extreme low sintering temperature about 400°C. Rietveld refinement of the crystal structure was performed using FULLPROF program and the cell parameters are a = b = c = 9.22039 Å with a space group F D -3 M (227). High performance microwav...
متن کاملPreparation and Analysis of MBS based Glass-Ceramic for LTCC Applications
In this paper the MBS (Magnesium borosilicate) based glass-ceramic have been prepared and characterised to find its suitability in Low temperature cofired ceramics (LTCC) technology. The glass-ceramics were prepared by using conventional solid state route. The experimental study was conducted on the MBS glass-ceramic containing MAS (Magnesium Alumino-Silicate) based glass-ceramic as an additive...
متن کاملThin-film passives in RF/microwave circuits
Until recently, most microwave capacitors were based on fired multilayer ceramic technology. In this process, layers of highly conductive electrode metal alloys are interleaved with low-loss ceramic dielectrics in a multilayer fashion until the target capacitance is obtained. The resulting stack is then sintered into a monolithic structure in a high-temperature firing process. This process cont...
متن کاملEffect of Conductor Surface Roughness and Geometry on Microwave Loss
Low Temperature Co-fired Ceramic (LTCC) technology is being used for various high frequency applications such as T/R modules for radar, bluetooth communication modules, LAN switches, and automotive radar. One of the key properties of the electronic packages for these applications is microwave loss. LTCC metallizations are typical thick film conductors. Conventional thick film technology has rel...
متن کاملLTCC System for High Frequency Applications
Using LTCC (Low temperature co-fired ceramics) system in wireless packaging applications is wide used today. The properties requirements for wireless applications are requiring low loss at high frequencies and good characteristic comparative to cost. Several designs of packaging systems are presented in various microwave packaging applications such antenna. The relative curves of dielectric con...
متن کامل