A New Energy x Delay-Aware Flip-Flop

نویسندگان

  • Inhwa Jung
  • Moo-young Kim
  • Dongsuk Shin
  • Seon Wook Kim
  • Chulwoo Kim
چکیده

This paper describes the Differential Pass Transistor Pulsed Latch (DPTPL) which enhances D-Q delay and reduce power consumption using NMOS pass transistors and feedback PMOS transistors. The proposed flip-flop uses the characteristic of stronger drivability of NMOS transistor than that of transmission gate if the sum of total transistor width is the same. Positive feedback PMOS transistors enhance the speed of the latch as well as guarantee the full-swing of internal nodes. Also, the power consumption of proposed pulsed latch is reduced significantly due to the reduced clock load and smaller total transistor width compared to conventional differential flip-flops. DPTPL reduces E × D by 45.5% over ep-SFF. The simulations were performed in a 0.1 μm CMOS technology at 1.2 V supply voltage with 1.25 GHz clock frequency. key words: flip-flop, pulsed-latch, low-power, high-speed

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A new low power high reliability flip-flop robust against process variations

Low scaling technology makes a significant reduction in dimension and supply voltage, and lead to new challenges about power consumption such as increasing nodes sensitivity over radiation-induced soft errors in VLSI circuits. In this area, different design methods have been proposed to low power flip-flops and various research studies have been done to reach a suitable hardened flip-flops. In ...

متن کامل

Introducing New Structures for D-Type Latch and Flip-Flop in Quantum-Dot Cellular Automata Technology and its Use in Phase-Frequency Detector, Frequency Divider and Counter Circuits

Quantum-dot cellular automata (QCA) technology is an alternative to overcoming the constraints of CMOS technology. In this paper, a new structure for D-type latch is presented in QCA technology with set and reset terminals. The proposed structure, despite having the set and reset terminals, has only 35 quantum cells, a delay equal to half a cycle of clocks and an occupied area of ​​39204 nm2. T...

متن کامل

Two Novel D-Flip Flops with Level Triggered Reset in Quantum Dot Cellular Automata Technology

Quantum dot cellular automata (QCA) introduces a pioneer technology in nano scale computer architectures. Employing this technology is one of the solutions to decrease the size of circuits and reducing power dissipation. In this paper, two new optimized FlipFlops with reset input are proposed in quantum dot cellular automata technology. In addition, comparison with related works is performed.Th...

متن کامل

Performance Analysis of Reversible Sequential Circuits Based on Carbon NanoTube Field Effect Transistors (CNTFETs)

This study presents the importance of reversible logic in designing of high performance and low power consumption digital circuits. In our research, the various forms of sequential reversible circuits such as D, T, SR and JK flip-flops are investigated based on carbon nanotube field-effect transistors. All reversible flip-flops are simulated in two voltages, 0.3 and 0.5 Volt. Our results show t...

متن کامل

High-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop

Multi-Supply voltage design using Cluster Voltage Scaling (CVS) is an effective way to reduce power consumption without performance degradation. One of the major issues in this method is performance and power overheads due to insertion of Level Converting Flip-Flops (LCFF) at the interface from low-supply to high-supply clusters to simultaneously perform latching and level conversion. In this p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • IEICE Transactions

دوره 89-A  شماره 

صفحات  -

تاریخ انتشار 2006