Characterisation of Titanium Dental Implants. II: Local Biomechanical Model

نویسندگان

  • Stig Hansson
  • Johanna Löberg
  • Ingela Mattisson
  • Elisabet Ahlberg
چکیده

A theoretical model for estimation of the bone-to-implant interfacial shear strength induced by implant surface roughness has been developed. Two different assumptions regarding the constitutive behaviour of the interfacial bone were made. 1) The bone exhibits an ideally plastic deformation – the plastic mode. 2) The bone exhibits a linearly elastic deformation – the elastic mode. In the plastic mode it was found that the estimated interfacial shear strength was directly proportional to the 2D surface roughness parameter mean slope. For the elastic mode a new 2D surface roughness parameter was defined. With this parameter a direct proportionality between parameter value and estimated interfacial shear strength was also obtained in the elastic mode. The model was extended into 3D mode. The model was used to evaluate topographies of implant surfaces. The calculated results showed a similar trend to interfacial shear strength results reported in vivo.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Implant Supported Fixed Dental Prostheses Using a New Monotype Zirconia Implant—A Case Report

Currently, titanium or specific titanium alloys are the most often used materials for the fabrication of dental implants. Many studies have confirmed the osseointegrative capacity and clinical long-term performance of moderately rough titanium implants. However, disadvantages have also been reported with regard to peri-implant infections and the titanium metal properties. Tooth colored ceramic ...

متن کامل

مقایسه بیومکانیکی ایمپلنت دندانی تیتانیوم خالص با زیرکونیوم -5/2% نایوبیوم پس از کاشت به روش اجزای محدود

Background and Aims: Improving dental implantation conditions in order to reduce the failure is always desirable for researchers. The aim of this study was to compare two different materials of dental implants from the viewpoint of biomechanical effect after placement and loading in the mandible. Materials and Methods: A 3D model of mandible was designed in the MIMICS 10.01 software. Then,...

متن کامل

Mechanical Characterisation and Biomechanical and Biological Behaviours of Ti-Zr Binary-Alloy Dental Implants

The objective of the study is to characterise the mechanical properties of Ti-15Zr binary alloy dental implants and to describe their biomechanical behaviour as well as their osseointegration capacity compared with the conventional Ti-6Al-4V (TAV) alloy implants. The mechanical properties of Ti-15Zr binary alloy were characterised using Roxolid© implants (Straumann, Basel, Switzerland) via ultr...

متن کامل

NaOCl-mediated biofunctionalization enhances bone-titanium integration.

The aim of this study was to examine the effect of NaOCl pretreatment on the biomechanical fixation of implant at the early healing stage of a rat model. Polished titanium cylindrical implants and disks were prepared, and one-half of these samples were dual acidetched. Then, one-half of both surfaces were chemically-cleaned by pretreatment with 5% NaOCl solution for 24 h. Morphological analyses...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010