ATLAS Electronics System Overview
نویسنده
چکیده
A short overview of the ATLAS readout and level-1 trigger electronics is presented, as well as a few system issues that ATLAS is willing to address in a coordinated way. ATLAS readout system overview
منابع مشابه
Installation and commissioning of the ATLAS
The cryostats of the ATLAS LAr calorimeter system are installed in the ATLAS cavern since several years. Following this, an effort to install and commission the front-end and back-end read-out electronics as well as the timing, trigger and control electronics (infrastructure, crates, and boards) has been ongoing and is finished now, in time for the cavern closure. Following cautious procedures ...
متن کاملThe ATLAS Level-1 Trigger: Status of the System and First Results from Cosmic-Ray Data
The ATLAS detector at CERN’s Large Hadron Collider (LHC) will be exposed to proton-proton collisions from beams crossing at 40 MHz. At the design luminosity of 10 cm s there are on average 23 collisions per bunch crossing. A threelevel trigger system will select potentially interesting events in order to reduce the read-out rate to about 200 Hz. The first trigger level is implemented in customb...
متن کاملCALIBRATION AND MONITORING OF THE TILE HADRONIC CALORIMETER OF ATLAS WITH A 137Cs SOURCE
Monitoring and intercalibration of the ATLAS TileCal is based on a hydraulically driven gamma source system. Extensive R&D has been carried out and has led to a detailed design for the full ATLAS TileCal. A prototype system has been built and tested on the Barrel and Extended Barrel modules. The realisation of the Cs source system, results concerning its performance, comparisons with other cali...
متن کاملA short overview of the electrical machines control based on Flatness-technique
Optimal linear controllers and high computational non-linear controllers are normally applied to control the nonlinear systems. Flatness control method is a control technique for linear systems as well as nonlinear systems by static and dynamic feedback namely as endogenous dynamic feedback. This method takes into account the non-linear behavior of the process while preventing complicated compu...
متن کاملReadiness of the ATLAS Trigger and Data Acquisition system for the first LHC beams
The ATLAS Trigger and Data Acquisition (TDAQ) system is based on O(2k) processing nodes, interconnected by a multi-layer Gigabit network, and consists of a combination of custom electronics and commercial products. In its final configuration, O(20k) applications will provide the needed capabilities in terms of event selection, data flow, local storage and data monitoring. In preparation for the...
متن کامل