Effect of microbial activity on penetrometer resistance and elastic modulus of soil at different temperatures
نویسندگان
چکیده
We explore the effect of microbial activity stimulated by root exudates on the penetrometer resistance of soil and its elastic modulus. This is important because it is a measure of the mechanical strength of soil and it correlates closely with the rate of elongation of roots. A sandy soil was incubated with a synthetic root exudate at different temperatures, for different lengths of time and with selective suppression of either fungi or bacteria. The shape of the temperature response of penetrometer resistance in soil incubated with synthetic exudate was typical of a poikilothermic temperature response. Both penetrometer resistance and small strain shear modulus had maximum values between 25 and 30°C. At temperatures of 20°C and less, there was little effect of incubation with synthetic root exudate on the small strain shear modulus, although penetrometer resistance did increase with temperature over this range (4-20°C). This suggests that in this temperature range the increase in penetrometer resistance was related to a greater resistance to plastic deformation. At higher temperatures (> 25°C) penetrometer resistance decreased. Analysis of the DNA sequence data showed that at 25°C the number of Streptomyces (Gram-positive bacteria) increased, but selective suppression of either fungi or bacteria suggested that fungi have the greater role with respect to penetrometer resistance. HIGHLIGHTS Effect of microbial activity stimulated by synthetic root exudates on the mechanical properties.We compared penetrometer measurements and estimates of elastic modulus with microbial community.Penetrometer resistance of soil showed a poikilothermic temperature response.Penetrometer resistance might be affected more by fungi than bacteria.
منابع مشابه
Investigating the Effect of Microbial Induced Carbonate Precipitation on Reducing Wind Erodibility of Soils in Segzi Desert Area, Isfahan
Desertification has become one of the main problems of human societies living in the vicinity of desert areas in recent years. One of the methods that have been considered in recent years and are rapidly expanding in the field of soil mechanics is the Microbial Induced Carbonate Precipitation (MICP). In this method, urea-positive organisms that are naturally present in the soil can stabilize th...
متن کاملUsing an Elastic, Expandable Sealant System for Zonal Isolation of Maroon Wells: a Laboratory Study
An oil and gas well cementing in Gachsaran formation, where sustained annular pressure has been reported in many wells, presents a big challenge in Maroon field. The main challenges are preventing gas migration and achieving zonal isolation using a competent cement sealant system which is able to withstand downhole stresses and high temperatures during production cycles. Unlike conventional cem...
متن کاملMechanical Properties of Low Plasticity Clay Soil Stabilized with Iron Ore Mine Tailing and Portland Cement
Due to economical and environmental issues, utilization of mineral wastes, e.g. iron ore mine tailing (IOMT), as road materials can be recommended as a sustainable alternative. In the present study, mechanical properties, as well as resistance to freezing and thawing cycles (F-T) of low plasticity clay soil stabilized with different percentages of Portland cement (0, 6, 9, 12 and 15%) and diffe...
متن کاملImpact of Wastewater Irrigation on Soil Mechanical Properties in the Green Space of Mobarakeh Steel Complex
Long-term use of treated wastewaters for irrigation adds compounds and/or ions to soils which might alter the soil physical, hydraulic and mechanical properties. Soil mechanical properties are closely linked with the plant growth. This study was conducted to investigate the effect of short-, mid- and long-term applications of the treated wastewater of Mobarake Steel Company in Isfahan on the so...
متن کاملUsing Miniature Cone Penetration Test (Mini-CPT) to determine engineering properties of sandy soils
In-situ testing techniques have proven to be successful in improving the speed and reliability of geotechnical investigations. One of the most common in-situ methods in engineering geology and site investigation is Cone Penetration Test (CPT), which is mainly used for characterization of soils, as it is a robust, simple, fast, reliable and economic test that can provide continuous soundings of ...
متن کامل