IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613

نویسنده

  • Arichandran Ramachandran
چکیده

All rights reserved by www.ijsrd.com 808 Clustering of Vehicles by Performance Characteristics for Indian MultiLane Highways Arichandran Ramachandran Department of Civil Engineering Institute of Technology, University of Gondar, Post Box No. 196, Gondar, Ethiopia Abstract— Vehicle type plays an important role in the accident occurrence, lane changing process and capacity analysis. In heterogeneous traffic, like Indian roads, vehicle interaction is high due to different types of vehicles with difference in speed. Sizes of vehicle-type are same in existing vehicle classification. But, the performance characteristics of vehicle types are different. Grouping the vehicles based on performance characteristics and vehicle configuration is needed for multi-lane highways. The present study is an attempt to identify and group the same performance characteristics vehicles using dynamic cluster based on free-flow speed and Vehicle configuration. Classified traffic volume and spot-speed study have been carried out for a four lane divided highway (NH7 – Virudhunagar to Madurai stretch, Tamilnadu) in India. The road stretch has been chosen as far as away from the city influence to experience the free flow conditions. Considering only free-flow speed, Euclidean lengths for each existing vehicles types have been calculated. Based on Euclidean lengths, vehicles are classified into five groups. This five groups are further modified as eight groups considering the vehicle configuration also. Traffic composition and standard deviation of speeds for new vehicle types have been obtained as the performance characteristics.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613

A Parallel multiplier using approximate compressors are proposed in this paper. The two new approximate 4-2 compressors are proposes that the simplified compressors have better power consumption than the optimized 4-2 compressor existing designs. These approximate compressors are then used in the restoration module of a Parallel multiplier. Four different schemes for utilizing the proposed appr...

متن کامل

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613

As required controlling speed of motors to do control prosthetic arm movement, conventional control method is not reliably control multiple functions together, So, new control strategy is requiring tackling with this difficult problem. In this review paper we survey some recent developments of various methodologies for improvement in settling time and overshoot.

متن کامل

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 10, 2016 | ISSN (online): 2321-0613

several edge recognition strategies have now been planned within the past decades. Many are derived from differential strategies such as for example Sobel, Roberts, Laplacian operators, and therefore on. Nevertheless these calculations are quite sensitive to sound, in order to restrain sound before sensing edges. In this report intensive literature review has been presented in numerous edge rec...

متن کامل

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 02, 2016 | ISSN (online): 2321-0613

This paper describes the cross-talk analysis of high-speed PCB design. Some models using multiple PCB traces above a ground plane having guard traces and vias are taken and the results are obtained from modeling and simulation using Ansoft HFSS software tool and are compared with the experimental results. Reduction techniques of crosstalk are highlighted.

متن کامل

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 04, 2016 | ISSN (online): 2321-0613

Globalization, growing competition and with emergence of new technologies, change shows economic profile of nations & knowledge driven economies have created a scenario where quality is no more a desirable strategy –it has become a survival strategy. Six Sigma is widely used in material & service organizations to enhance quality & to reduce cost but the time has come to move one step further to...

متن کامل

IJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613

Input vector monitoring concurrent built-in selftest schemes perform testing during the normal operation of the circuit without imposing a need to set the circuit offline to perform the test. These schemes are evaluated based on the hardware overhead and the concurrent test latency i.e., the time required for the test to complete, whereas the circuit operates normally. In this brief, we present...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016