Depolymerization of polyesters in sub- and supercritical water
نویسندگان
چکیده
Depolymerization behavior polyesters (poly(ethylene terephthalate) (PET) and poly(ethylene 2,6-naphthalene dicarboxylate) (PEN)) in suband supercritical water was investigated for the purpose of monomer recycling. In case of the depolymerization of PET, the yield of terephthalic acid (TPA) increased to 90 % with increasing reaction temperature up to 693 K while the maximum yield of ethylene glycol (EG) achieved was only 60 % at 573 K. For PEN depolymerization, the yield of 2,6-naphthalene dicarboxylic acid (2,6-NPA) also increased to 97 % with increasing reaction temperature up to 693 K and the maximum yield of EG obtained was also 60 % at 573 K. The higher yield of 2,6-NPA than that of TPA was ascribed to the higher stability of 2,6-NPA than that of TPA. The lower yields of EG than the corresponding monomers (TPA and 2,6,-NPA) in the decomposition of the two kinds of polyesters were caused by the catalytic dehydroxylation of EG by protons derived from dicarboxylic acids.
منابع مشابه
Hydrothermal Depolymerization of Polyesters and Polycarbonate in the Presence of Ammonia and Amines
Reaction conditions, temperature and pressure ranges, for various chemical recycling proc‐ esses of polyesters are sketched in Figure 1. So far, various recycling processes for polyesters have been investigated and developed, as reviewed by Paszun and Spychaj [1]: alcoholysis with methanol or ethanol, glycolysis with ethylene glycol or propylene glycol, alkali hydrolysis with sodium hydroxide, ...
متن کاملCatalytic Depolymerization of Alkali Lignin in Sub- and Super-critical Ethanol
The effects of reaction parameters on catalytic depolymerization of alkali lignin in suband super-critical ethanol were investigated using a high pressure autoclave, and the liquid oil and solid char products were characterized. The experimental data indicated that Rh catalysis, controlling reaction conditions at ethanol critical temperature (240 oC) and pressure (7.0 MPa), high ethanol/water r...
متن کاملSub and Supercritical Decontamination of Oil-Based Drill Cuttings: A Review
Drill mud is a fluid which is used in oil extraction industries in order to cool and lubricate the drill bit. Due to containing numerous toxic components, it is considered as a hazardous waste which must be treated before discharging to the environment. Current separation techniques for drill cutting treatment can be categorized into three main categories of physical (dewatering), physiochemica...
متن کاملDrug Nano-Particles Formation by Supercritical Rapid Expansion Method; Operational Condition Effects Investigation
Dissolution pressure and nozzle temperature effects on particle size and distribution were investigated for RESS (Rapid Expansion of Supercritical Solution) process. Supercritical CO2 was used as solvent and Ibuprofen was applied as the model component in all runs. The resulting Ibuprofen nano-particles (about 50 nm in optimized runs) were analyzed by SEM and laser diffraction pa...
متن کاملComparative of Physico-Chemical Properties of Wheat Germ Oil Extracted with Cold Press and Supercritical CO2 Extraction
In this study, moisture content, free fatty acids, peroxide, iodine value, unsaponifiable matter, saponification value, fatty acid composition and tocopherol contents of wheat germ oil obtained by SC-CO2 extraction and cold press technology were investigated. Moisture, free fatty acid (FFA), peroxide value, iodine value, unsaponifiable matter and saponification value of cold pres...
متن کامل