Nanogap electrode fabrication for a nanoscale device by volume-expanding electrochemical synthesis.
نویسندگان
چکیده
A novel nanogap fabrication method using an electrochemical nanopatterning technique is presented. Electrochemical deposition of platinum ions reduces the microgap size to the sub-50-nm range due to the self-limited volume expansion of the electrodes. Additionally, the low crystallinity of platinum reduces the line edge roughness in the electrodes, whereas the high crystallinity of gold increases it. Current compliance, a buffered resistor, and a symmetric deposition strategy are used to achieve high reliability and practicality of nanogap electrodes. As a possible application, an organic thin-film transistor using the nanogap electrodes is also demonstrated.
منابع مشابه
Electrochemical Amplification in Side-by-Side Attoliter Nanogap Transducers
We report a strategy for the fabrication of a new type of electrochemical nanogap transducer. These nanogap devices are based on signal amplification by redox cycling. Using two steps of electron-beam lithography, vertical gold electrodes are fabricated side by side at a 70 nm distance encompassing a 20 attoliter open nanogap volume. We demonstrate a current amplification factor of 2.5 as well ...
متن کاملFabrication of a Horizontal and a Vertical Large Surface Area Nanogap Electrochemical Sensor
Nanogap sensors have a wide range of applications as they can provide accurate direct detection of biomolecules through impedimetric or amperometric signals. Signal response from nanogap sensors is dependent on both the electrode spacing and surface area. However, creating large surface area nanogap sensors presents several challenges during fabrication. We show two different approaches to achi...
متن کاملElectrochemical template synthesis of multisegment nanowires: fabrication and protein functionalization.
Multisegment nanowires represent a unique platform for engineering multifunctional nanoparticles for a wide range of applications. For example, the optical and magnetic properties of nanowires can be tailored by modifying the size, shape, and composition of each segment. Similarly, surface modification can be used to tailor chemical and biological properties. In this article, we report on recen...
متن کاملNanocarbon-scanning probe microscopy synergy: fundamental aspects to nanoscale devices.
Scanning probe techniques scanning tunneling microscopy (STM) and atomic force microscopy (AFM) have emerged as unique local probes for imaging, manipulation, and modification of surfaces at the nanoscale. Exercising the fabrication of atomic and nansocale devices with desired properties have demanded rapid development of scanning probe based nanolithographies. Dip pen nanolithography (DPN) and...
متن کاملAnisotropic Dry Etching ( RIE ) for Micro and Nanogap Fabrication
The main objective of this research is to develop a micro and nanogap structure using dry anisotropic etching –Reactive Ion EtchingRIE. Amorphous silicon material is used in the micro and nanogap structure and gold as electrode. The fabrication processes of the micro and nanostructure are based on conventional photolithography, wet etching for the Al pattern and wet etching for a-Si pattern usi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Small
دوره 7 15 شماره
صفحات -
تاریخ انتشار 2011