Localized Dual-side Mushroom Ground Plane Structure for the Ssn Suppression in Multi- Layer Pcbs
نویسندگان
چکیده
A novel dual-side mushroom ground plane (DMGP) structure is proposed for the noise suppression in high-speed multilayer printed circuit boards (PCBs). The proposed method is localized suppression technique where a dual-side mushroom structure is placed below the noise-sensitive device. In multilayer PCBs with DMGP, noise between two ports with large or small ports spacing can be minimized effectively, which is flexible for the layout of mixed-signal system. Wideband noise suppression is achieved for the fabricated boards even though the port spacing is only 3.5 mm.
منابع مشابه
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملComplementary Spiral Resonators for Ultrawideband Suppression of Simultaneous Switching Noise in High-Speed Circuits
In this paper, a novel concept for ultra-wideband simultaneous switching noise (SSN) mitigation in high-speed printed circuit boards (PCBs) is proposed. Using complementary spiral resonators (CSRs) etched on only a single layer of the power plane and cascaded co-centrically around the noise port, ultra-wideband SSN suppression by 30 dB is achieved in a frequency span ranging from 340MHz to beyo...
متن کاملA Noise Suppression Technique Using Dual Layer Spirals with Various Ground Struc- Ture for High-speed Pcbs
In this paper, small dual layer spirals with several various ground structure are applied in the vicinity of the DDR3 high-speed circuit to achieve noise suppression characteristics up to 3.2 GHz region. For wider noise suppression bandwidth, the dual layer spirals with various ground structure, which provide high self resonance frequency (SRF) as well as inductance value, are implemented. The ...
متن کاملDevelopment of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte
In this paper a dual band and high gain H-plane horn antenna implemented by substrate integrated waveguide (SIW) using a single layer thin substrate is introduced. The proposed antenna consists of five parts of rectangular waveguide with different width arranged in a staircase manner to allow mode combination of fundamental and higher propagating modes of the structure. By adjusting the length ...
متن کاملGroove Gap Waveguide (GGW) H-plane Horn Antenna and a Method for Its Back lobe Suppression
recently a new structure called groove gap waveguide (GGW) is introduced to implement low loss microwave component devices especially for millimeter wave applications. This paper presents a new type of H-plane horn antenna making use of this new technology in which backward radiation is significantly suppressed by introducing a high impedance surface at the antenna aperture. The high impe...
متن کامل