Gas-Solid Catalytic Reactions
ثبت نشده
چکیده
The outline of this chapter is as follows: *.1 will show some application areas together with the number of types of reactors available for carrying out gas-solid catalyzed reactions. Section *.2 will focus on the kinetic models suitable for describing these reactions. Section *.3 will show how to set up the reactor models and will also show the mass transport interactions need to be modeled. These transfer effects are then shown in detail in Section *.4 and then applied to design in Section *.5.
منابع مشابه
Microstructured reactors for catalytic reactions
This review addresses the catalytic reactions performed in microstructured reactors, which are more and more recognized in recent years as a novel approach for chemistry and chemical process industry. They are particularly suited for highly exothermic and fast reactions allowing temperature control and isothermal operation. A brief evaluation of the advantages for gas-phase, liquid-phase, and g...
متن کاملa New Approximate Solution Technique (Quantized Method) for Simultaneous Gas Solid Reactions
Simultaneous reactions between solids and gases are very important in the chemical and metallurgical processes. In the modeling, the chemical reaction and diffusion of gases must be considered. Therefore, a set of coupled partial differential equations is found. When the kinetic is a function of solid concentration, there is not any analytical solution for these equations. Therefore, numerical ...
متن کاملMicroreactors for Gas Liquid Solid reactions – Novel Catalyst Support Based on Carbon Nanofibers
Introduction Currently, there is tremendous interest in the field of micro-structured gas-liquid contactors containing modified catalytic coatings on its micro-structured internals (Fig. 1) [1]. The most recent trend in the design of three-phase catalytic microreactors focuses on the use of structured catalyst supports, i.e. that the catalyst has to be deposited on a rigid, orderly arranged sup...
متن کاملInfrared Thermopile Temperature Measurement Technique in Microwave Heating Systems
Temperature measurement in microwave systems is essential for thermally driven processes, namely, catalytic reactions and ceramic sintering. Although, the application of direct thermometry methods, namely, thermocouples, have been commonly articulated in the available literature, however, contacted temperature measurement mechanisms have aroused concerns associated with the disruption of the el...
متن کاملConversion and Residence Time Calculation for Gas-solid Solid Reactions of the Cylindrical-shaped Particles with Con-stant Size Using the Shrinking Core Model
In this paper, a mathematical model is developed to calculate the conversion and the residence time reaction for plug flow and mixed flow in the reactors filled with cylin-drical particles using the shrinking core model. In this modeling, the size of the particles is un-chamged during the reaction. Also, the reaction rate is controlled by the gas layer resistance, the ash layer resistance, and ...
متن کامل