A Low Power High Speed Class-B Buffer Amplifier for Flat Panel Display Application
نویسندگان
چکیده
A low power, high speed, but with a large input dynamic range and output swing class-B output buffer circuit which is suitable for the flat-panel display application is proposed. The buffer draws little current during static but has a large driving capability during transients. It has been demonstrated with the TSMC 0.6μm CMOS technology.
منابع مشابه
Reduce EMI from Class D Amplifiers Using New Modulation Techniques and Filter Architectures - Application Note - Maxim
Class D amplifiers have always offered better efficiency than Class AB amplifiers for low-power applications. This inherent advantage, however, rarely outweighed the traditional disadvantages of Class D, which were higher cost, reduced audio performance, and the need for output filtering. Recent advances in Class D technology, however, have brought Class D costs and audio performance up to equa...
متن کاملHigh Speed Low Power Output Buffer amplifier for large-size LCD Applications
The present paper Performance improvement in high speed low power out put Buffer amplifier for large –LCD applications. The proposed buffer achieves high-speed driving performance while drawing a low quiescent current during static operation. The circuit offers enhanced slewing capabilities with limited power consumption by exploiting a slew detector which monitors the output voltage of the inp...
متن کاملAn Ultra Low-Power High-Speed Rail-to-Rail Buffer Amplifier for LCD Source Drivers
An ultra low-power high-speed rail-to-rail buffer amplifier with improved current summing circuit is proposed for LCD source drivers. By placing two complementary differential pairs in parallel, it is possible to obtain a rail-to-rail input stage. Then, a current summing circuit with two embedded comparators is proposed. With the proposed current summing circuit, the output stages will be turne...
متن کاملA Low Offset Buffer Amplifier for Liquid-Crystal Display Signal Driver Application
An offset voltage adjustment technique, which can be used to reduce the offset voltage of the buffer amplifier in the liquid-crystal display signal driver, is proposed. This adjustment, which is finished before driving the display panel, does not need to be adjusted for every row scanning cycle and does not increase the settling time. An experimental prototype output buffer implemented in a 0.3...
متن کاملDesign of a Low Voltage Class-AB CMOS Super Buffer Amplifier with Sub Threshold and Leakage Control
This paper describes a CMOS analogy voltage supper buffer designed to have extremely low static current Consumption as well as high current drive capability. A new technique is used to reduce the leakage power of class-AB CMOS buffer circuits without affecting dynamic power dissipation. The name of applied technique is TRANSISTOR GATING TECHNIQUE, which gives the high speed buffer with the redu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEEE Trans. VLSI Syst.
دوره 10 شماره
صفحات -
تاریخ انتشار 2002