Beam Dynamics Studies on the Isac Ii Superconducting Linac
نویسندگان
چکیده
The ISAC II superconducting linac is presently in the beam commissioning phase. The linac lattice consists of modules of four quarter wave cavities and one superconducting solenoid. At the moment five cryomodules (indicated as medium beta section) are installed. Beam steerers between cryomodules compensate for steering effects due to misalignments in the solenoids. Beam dynamics aspects of linac commissioning are highlighted.
منابع مشابه
Upgrade of the Isac Dtl Tuning Procedure at Triumf
The TRIUMF ISAC facility has two variable energy heavy ion linacs as post accelerators for radioactive ion beams. The ISAC I linac is a warm IH-DTL with five accelerating tanks and three bunchers, the ISAC II linac uses twenty independently phased superconducting cavities. The first linac operates between 150keV/u and 1.8Mev/u; the second boosts the 1.5MeV/u injected beam by 20MV. The DTL is tu...
متن کاملThe Superconducting Medium Beta Prototype for Radioactive Beam Acceleration at Triumf
A 106.08MHz superconducting quarter wave resonator, based on the bulk niobium technology developed at LNL for low beta heavy ion linacs, has been designed, constructed and tested in a collaboration between INFNLNL and TRIUMF. This superconducting heavy ion linac of ISAC-II, the future extension to the present ISAC radioactive beam facility. sections. Cavity design characteristics and test resul...
متن کاملProgress in the Conceptual Design of the Isac-ii Linac at Triumf
TRIUMF is funded through to 2005 to proceed with an extension to the ISAC facility, ISAC-II, to permit acceleration of radioactive ion beams up to energies of at least 6.5 MeV/u for masses up to 150. The upgrade includes the addition of a post-stripper superconducting linac to accelerate beams of 3 ≤ A/q ≤ 7 to an energy of at least 6.5 MeV/u. The possibility of using the superconducting linac ...
متن کاملPerformances of the ISAC Heavy Ion Linacs
ISAC is the TRIUMF facility for the production and post acceleration of Rare Isotope Beams (RIBs). The post acceleration section includes two normal conducting linacs, an RFQ injector and a variable energy IH-DTL, and a superconducting linac composed of five cryomodules each containing four quarter wave bulk niobium resonators. All three machines operate CW. The RFQ and DTL deliver beam since 2...
متن کاملDecelerating Heavy Ion Beams Using the Isac Dtl
At the ISAC facility in TRIUMF radioactive ion beams (RIB) are produced using the ISOL method and post accelerated. The post accelerator chain consists of a radio frequency quadrupole (RFQ) injector followed by a drift tube linac (DTL) that accelerates the ions from 150 keV/u up to 1.8 MeV/u. A further stage of acceleration is achieved using a superconducting linac where the beam is injected us...
متن کامل