Application of Protruded Strip Resonators to Design an UWB Slot Antenna with WLAN Band-Notched Characteristic
نویسنده
چکیده
In this paper, a different method for designing a novel and compact microstrip-fed slot antenna with band-notched characteristic for UWB application is proposed. In the proposed antenna, a pair of cross-shaped strips protruded inside an extra rectangular slot in the ground plane are used to crate an additional resonance in higher frequencies. By obtaining this resonance, the usable upper frequency of the antenna is extended from 9 to 14.8 GHz which provides a wide usable fractional bandwidth of more than 135%. Additionally, by using a square ring radiating stub with a pair of protruded T-shaped strips inside the ring, a desired frequency band-stop performance has been obtained. Good antenna gain and VSWR characteristics are obtained in the frequency band of interest. The proposed antenna can operate from 3.04 to 14.8 GHz for VSWR < 2 with a rejection band around 5.1 to 6 GHz to suppress any interference from wireless local area network (WLAN) systems. Simulated and experimental results obtained for this antenna show that it exhibits good radiation behavior within the UWB frequency range.
منابع مشابه
Design of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework
In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...
متن کاملAn Improved CPW-Fed Printed UWB Antenna With Controllable Band-notched Functions
A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملA Novel Compact Ultra-Wideband Antenna with Single and Double Band Rejection
Band-notch characteristic has been of great interest recently to overcome the electromagnetic interference of Ultra-wideband systems (UWB) with other existing ones. In this paper, we present a novel microstrip-fed antenna with band rejection property appropriate for UWB applications. Band-notch characteristic has been achieved by adding a rectangular resonant element to the ground section. A pr...
متن کاملMultiband Slot Loaded Uniplanar CPW-fed Monopole Antenna with Asymmetrical Arms
This paper presents a new approach for the design of a multiband uniplanar CPW-fed monopole antenna. The antenna consists of a fork like monopole strip to which is added an inverted U-shaped strip. The three branch fork like strip can create three resonant bands within the WLAN range while the placement of the inverted U-shaped strip provides a better impedance matching for the lowest resonant ...
متن کامل