Planar Elliptic Broadband Antenna with Wide Range Reconfigurable Narrow Notched Bands for Multi-Standard Wireless Communication Devices
نویسندگان
چکیده
A planar elliptic broadband antenna with reconfigurable dual stop-bands performance was successfully designed and performed for multi-standard wireless communication systems. The proposed antenna consists of a broadband micro-strip fed printed monopole operating in the frequency range 0.75– 6GHz. The notch-band characteristic was obtained by printing two Open Loop Resonators (OLRs) on the front side of the substrate close to the micro-strip feed-line. By adjusting the OLRs parameters, mono or dual band-rejection can be obtained. The passive broadband antenna was optimized to achieve narrow band rejection over the UMTS-band (around 2.1 GHz) and the WiMAX-band (around 3.5 GHz). The agility was produced by loading a varactor diode on each OLR. The major advantages of this structure are the high selectivity of the dismissed-bands, continuous reconfiguration and wide tuning range of the notched bands. Four prototypes were realized and experimentally characterized. The measured tuning ranges corresponding to the notched bands are about 850 MHz (2.25–3.1 GHz) for the rejected UMTS-band and 570 MHz (3.84–4.41 GHz) for the WiMAX-band. Simulated and measured results are presented and discussed.
منابع مشابه
An Improved CPW-Fed Printed UWB Antenna With Controllable Band-notched Functions
A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کاملA Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications
This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...
متن کاملCompact Planar Ultrawideband Antennas with 3.5/5.2/5.8 GHz Triple Band-Notched Characteristics for Internet of Things Applications
Ultrawideband (UWB) antennas, as core devices in high-speed wireless communication, are widely applied to mobile handsets, wireless sensor networks, and Internet of Things (IoT). A compact printed monopole antenna for UWB applications with triple band-notched characteristics is proposed in this paper. The antenna has a very compact size of 10 x 16 mm2 and is composed of a square slotted radiati...
متن کاملA CPW-Fed Circular Wide-Slot UWB Antenna with Wide Tunable and Flexible Reconfigurable Dual Notch Bands
A coplanar waveguide (CPW)-fed circular slot antenna with wide tunable dual band-notched function and frequency reconfigurable characteristic is designed, and its performance is verified experimentally for ultra-wideband (UWB) communication applications. The dual band-notched function is achieved by using a T-shaped stepped impedance resonator (T-SIR) inserted inside the circular ring radiation...
متن کامل