Nucleation barriers at corners for cubic-to-tetragonal phase transformation
نویسندگان
چکیده
We are interested in the energetic cost of a martensitic inclusion of volume V in austenite for the cubic-to-tetragonal phase transformation. In contrast with the work of [Knüpfer, Kohn, Otto: Comm. Pure Appl. Math. 66 (2013), no. 6, 867–904], we consider domain with a corner and obtain a better scaling law for the minimal energy (Emin ∼ min(V , V )). Our predictions are in a good agreement with physical experiments where nucleation of martensite is usually observed near the corners of the specimen.
منابع مشابه
Nucleation barriers for the cubic-to-tetragonal phase transformation
We are interested in the phase transformation from austenite to martensite. This transformation is typically accompanied by the generation and growth of small inclusions of martensite. We consider a model from geometrically linear elasticity with sharp energy penalization for phase boundaries. Focusing on a cubic-to-tetragonal phase transformation, we show that the minimal energy for an inclusi...
متن کاملEffect of Amorphous Silica Addition on Martensitic Phase Transformation of Zirconia and Investigation of its Tetragonal Structure Stability Mechanisms
This work is focused on the effect of amorphous SiO2 addition on the phase transformation and microstructural evolution of ZrO2 particles. Considering the structural similarities between the amorphous ZrO2 and its tetragonal structure, XRD results showed initial nucleation of metastable tetragonal ZrO2 from its amorphous matrix upon heat treatment. This metastable phase is unstable in pure ZrO2...
متن کاملThe Bainitic Phase Transformation in Aluminium Containing Ductile Irons after Short Time of Austempering
The influence of aluminium on the microstructure of austempered ductile cast iron (ADI) has been studied. A number of irons of different compositions have been made by green sand casting and gravity die casting of appropriate design to provide the experimental materials. Austenitising was carried out at different temperatures and holding times for a variety of experimental irons to achieve suff...
متن کاملکلراسیون زیرکونیای آسیابکاری شده
The effects of mechanochemical treatment of monoclinic zirconia in high energy planetary ball mill on its phase transformation were investigated. The mechanical treatment in ball mill reduces the grain size, increases microstrain, and causes phase transition to metastable nanostructured tetragonal and cubic phases. XRD and TEM results show considerable amounts of amorphous phase during ball mil...
متن کاملComputational Modeling of Softening in a Structural Phase Transformation
We develop a free energy density to model a structural first-order phase transformation from a high-temperature cubic phase to a low-temperature tetragonal phase. The free energy density models the softening of the elastic modulus controlling the low-energy path from the cubic to the tetragonal lattice, the loss of stability of the tetragonal phase at high temperatures and the loss of stability...
متن کامل