Hydrodynamics and mass-transfer-limited current distribution for a submerged stationary hemispherical electrode under jet impingement
نویسندگان
چکیده
The stationary hemispherical electrode under a submerged impinging jet is suggested as an experimental system that is amenable to in situ observation and has a uniform current distribution below the mass-transfer-limited value. The present work provides solutions for the steady-state boundary-layer hydrodynamics and convective diffusion. The observation of a boundary layer separation in the present work suggests that the model for convective diffusion impedance for this system must account for both the circulation region which follows the point of boundary layer separation and the boundary layer region itself. The present work is intended to provide a foundation for the design of stationary hemispherical electrode systems and for development of models for the corresponding impedance response. © 2004 Elsevier Ltd. All rights reserved.
منابع مشابه
Applying a full implicit finite-difference method in jet impingement heat transfer studies
Jet impingement heat transfer is an effective and practical approach that is employed in many industrial processes where heating, cooling, or drying is required. Details of the heat or mass transfer rate have been investigated both experimentally and numerically and can be found in the published literature. In most of the numerical studies, control-volume approach has been employed to solve the...
متن کاملHeat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کاملThermal Performance of Jet Impingement with Spent Flow Management
The present study proposes novel micro-jet impingement heat sink with effusion holes for flow extraction. The design consists of impingement nozzles surrounded by multiple effusion holes to take away the spent fluid. A three-dimensional numerical model is used for steady, incompressible, laminar flow and conjugate heat transfer for the performance analysis of the proposed design. The computatio...
متن کاملNumerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders
A numerical study has been carried out for slot air jet impingement cooling of horizontal concentric circular cylinders. The slot air jet is situated at the symmetry line of a horizontal cylinder along the gravity vector and impinges on the bottom of the outer cylinder which is designated as θ=0°. The outer cylinder is partially opened at the top with a width of W=30mm and is kept at constant t...
متن کاملCfd Simulation of round Impinging Jet and Comparison with Experimental Data
In this work, fluid dynamics of a turbulent round impinging jet has been studied using Computational Fluid Dynamics (CFD) and the results have been compared with experimental data from the literature. The fluid was water with density of 1000 kg/m 3 and the average velocity of the submerged jet was kept constant at 10.7 m/s while the liquid viscosity varied from 1 cP to 100 cP. Different turbule...
متن کامل