Analytical heat diffusion models for heat sinks with circular micro-channels
نویسندگان
چکیده
Article history: Received 23 December 2009 Received in revised form 10 June 2010 Accepted 10 June 2010 Available online 16 July 2010
منابع مشابه
Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries
This study explores heat diffusion effects inmicro-channel heat sinks intended for electronic cooling applications. Detailed analytical models are constructed for heat sinks havingmicro-channels with rectangular, inverse trapezoidal, triangular, trapezoidal, anddiamond-shaped cross sections. Solutions are presented for both monolithic heat sinks and heat sinks with perfectly insulating cover pl...
متن کاملCooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method
In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...
متن کاملThermal Design Methodology for High-Heat-Flux Single-Phase and Two-Phase Micro-Channel Heat Sinks
This paper explores several issues important to the thermal design of single-phase and two-phase micro-channel heat sinks. The first part of the paper concerns single-phase heat transfer in rectangular micro-channels. Experimental results are compared with predictions based on both numerical as well as fin analysis models. While the best agreement between predictions and experimental results wa...
متن کاملMeasurement and correlation of critical heat flux in two-phase micro-channel heat sinks
Critical heat flux (CHF) was measured for a water-cooled micro-channel heat sink containing 21 parallel 215· 821 lm channels. Tests were performed with deionized water over a mass velocity range of 86–368 kg/ms, inlet temperatures of 30 and 60 C, at an outlet pressure of 1.13 bar. As CHF was approached, flow instabilities induced vapor backflow into the heat sink’s upstream plenum, which signif...
متن کاملReforming Integrated with Oxidation in Micro-Heat Exchanger Reactor with Circular Micro-Channels
Steam reforming integrated with oxidation of methanol was considered with numerical simulation. The parallel micro-channels with circular cross sections were used. Because when the catalytic deposited inside the rectangular micro-channels, it fills up the edges. Hence, the approximation of a cylindrical channel is appropriate. Effect of this changing in cross section was considered and results ...
متن کامل