Characterizing Shape of Effluent Particles by Image Analysis
نویسندگان
چکیده
Particle shape of wastewater effluents were investigated by implementing a dynamic particle image analyzer which provided data on the particle count, size, shape and circularity concurrently with images. The goals of this study were to characterize removal efficiency based on size and shape parameters for an in-line filtration process and to study correlation between size and shape parameters. Results showed that filter removal efficiency can be determined by various size and shape parameters, where different information is obtained for each analysis. This method has potential in evaluating treatment process efficiencies by coupling size and shape parameters into a
منابع مشابه
Synthesis and characterization of CdS nanoparticle anchored Silica-Titania mixed Oxide mesoporous particles: Efficient photocatalyst for discoloration of textile effluent
An efficient photocatalyst consisting of CdS nanoparticle dispersed mesoporous silica-titania was prepared using amphiphilic triblock copolymer P123 as template and silica-titania sol–gel precursors. The CdS nanoparticle was incorporated into silica-titania mesoporous nanosturctures by post impregnation method. The synthesized catalyst has been characterized by FTIR, TEM, SEM, and EDAX analysis...
متن کاملInfluence of wastewater particles on ozone degradation of trace organic contaminants.
In this Article, we demonstrate the influence of effluent particles (in the range of <50 μm) on ozone degradation of trace organic contaminants (TrOCs) and effluent-quality parameters. Secondary effluent was filtered through different pore-size filters and ozonated at various ozone doses. Degradation of both ozone-reactive and ozone-refractory contaminants improved following ozonation of efflue...
متن کاملEffects of Compactor Types on Aggregate Orientation of Asphalt Mixtures
More than 90% of Malaysian roads are constructed using asphaltic concrete. However, previous investigations of asphaltic concrete have mainly concentrated on the macroscopic properties of the composite materials based on the assumption that the mixtures are homogeneous and isotropic. This paper applies a digital image processing technique to compare the orientations of coarse aggregate particle...
متن کاملDeposition of Various Shapes Particles on a Rough Surface in Turbulent Flow
An experiment set-up is used to study wall deposition rate of particles on a rough surface in a turbulent channel flow. Deposition velocities for three classes of particles, namely, spherical glass particles, irregular shape polymer particles, and fibrous silicon particles are studied. The particle concentration at the test section was measured with the aid of an isokinetic probe in conjunction...
متن کاملارزیابی ریزساختاری آلیاژ Ni-Nb-Si در حین فرایند آلیاژسازی مکانیکی
In the present study, the mechanical alloying process was used to produce the Ni-Nb-Si amorphous alloy. X-ray diffraction (XRD)analysis and high-resolution transmission electron microscopy (HRTEM) were used to approve the amorphous phase formation after 12 hours of mechanical alloying. The results obtained from the SEM morphological images of powder particles during mechanical alloying showed t...
متن کامل